150-C60NCD

The Allen-Bradley 150-C60NCD is a solid-state device that is part of the Smart Motor Controller product category. It is specifically part of the SMC-3 product bulletin which is used to implement efficient starting and stopping of AC motors, protecting the connected motor from the harmful effects of high-starting current and mechanical stress brought by sudden change in motor shift of rotational direction. It most applications, it is also being used to lower energy consumption that directly contributes to lowered operational costs. The 150-C60NCD is applicable for use with line connected and delta connected motors. For line connected motors, the applicable motor current ranges from 20-60 Amperes and power ratings of 7.5-50.0 HP @ 60 Hz and 15-37 kW @ 50 Hz input voltage. For Delta connected motors, 34.6-104 Amperes, power ratings of 7.5-55 kW @ 50 Hz and 15-100 Hp @ 60 Hz. This smart motor controller has an input line voltage range of 200-600 VAC, 3-Phase while the separate control voltage input is 100-240VAC, 1-Phase. The 150-C60NCD is configurable to implement Soft-start, Current limit start, Selectable kick-start, Coast-to-rest and Soft-stop modes. It also has a configurable initial Torque output as well as configurable overload protection rating. The 150-C60NCD has rated insulation voltage of 600 VAC for UL/CSA/NEMA and 500 VAC for IEC while the dieelectric withstand is 2200VAC for UL/CSA/NEMA and 2500 VAC for IEC. This motor controller is compliant to UL 508, CSA C22.2 No.14, EN/IEC 60947-1 and EN/IEC 60947-4-2 standards and carries certifications from cULus Listed (Open Type) (File No. E96956, Guides NMFT, NMFT7), CSA Certified (File No. LR 1234), CE Marked (Open Type) per EMC and Low Voltage Directive and CCC Certified.

The 150-C60NCD Smart Motor Controller by Allen-Bradley is a compact motor controller with a rated operational input current of 60A and an overload range of 20-60A. It has an operational voltage ranging between 200 and 600V AC at 50-60 Hertz with an adjusting voltage of 100-240V AC. The 150-C60NCD offers circuit protection via the 225A UL Class K5 and RK5 Type 1 Fuses, and the UL Listed Thermal Magnetic Circuit Breaker. It has a UL/cUL rated internal power circuit with 200-600 Volt AC operational voltage range, an insulation voltage of 600V AC, and a Dielectric withstand of 2200V AC. The 150-C60NCD’s power circuit also has an impulse voltage of 6KV and features a DV/DT protection of 1000V/ ?s. It has 100-240V AC control circuit voltage with a 250V isolation voltage and a Dielectric withstand of 1500 Volt AC. The 150-C60NCD has an Auxiliary contactor with a single Electromagnetic relay circuit with a normally-open contact and a current rating of 0.6A at 120V and one of 0.3A at 240V. The 150-C60NCD has four operational modes (soft start, soft stop, current limit start, and selectable kickstart), and when operational, it can withstand a vibration of 1G and a shock rating of 15G. It weighs approximately 5lb, is enclosed in an open-style enclosure, and has dimensions of 36in x 51in x 14in.