150-C64NCA-K2

The Allen-Bradley 150-C64NCA-K2 controller is an SMC-3 series motor controller with an output current rating of 64 Amps. The SMC-3 low-voltage starters provide 3 to 480 Amps of output current and they support 200 to 690 Volts AC input voltage at 50 to 60 Hertz frequency. The SMC-3 controllers support five start modes and five stop modes. The integrated motor overload protection feature is also available. The setup of any of the SMC-3 controllers can be easily accomplished through DIP switches. A hold-to-test and push-to-reset push button is also provided. The rated impulse voltage for the 150-C64NCA-K2 controller is 6 kilovolts. The DV/DT protection is 1000 Volts per microsecond. The overvoltage category is Category III. All of the SMC-3 controllers are certified by the CSA, CE, CCCm and c-UL-us standards. The controllers also comply with the UL508, CSA, and EN/IEC standards.

The operating temperature range for the 150-C64NCA-K2 controller with an open enclosure is 23 to 122 degrees Fahrenheit. The temperature range for controller storage is -13 to 185 degrees Fahrenheit. The installation of the controller at an altitude above 2000 meters is not recommended. The non-condensing relative humidity level around the 150-C64NCA-K2 controller should be between 5 and 95%. The pollution degree rating for the 150-C64NCA-K2 controller is 2 and the protection rating is IP 2X. The mechanical specifications include an operational vibration rating of 1 G peak (with 0.006 inches of displacement), a non-operational vibration rating of 2.5 G peak (with 0.015 inches of displacement), an operational shock rating for 15 G, and a non-operational shock rating of 30 G. The weight of the 150-C64NCA-K2 controller is 5 kilograms. The dimensions of the 150-C64NCA-K2 controller are 8.11 x 2.83 x 5.12 inches. The minimum size of the enclosure required for the installation of the 150-C64NCA-K2 controller is 16 x 12 x 8 inches.