150-S317NUD

The 150-S317NUD controller is a smart motor controller which is microprocessor-based and it is part of the SMC-50 series from Allen-Bradley. The 150-S317NUD controller operates with only three-phase AC input, and the compatible input line voltages are 200 to 690 Volts AC (at 50 to 60 Hertz). The rated output current for the 150-S317NUD controller is 317 Amps. The 150-S317NUD controller can be used to control both Wye-Delta and line-connected motors. At 600 Volts AC input voltage, the output power and the output current for line-connected motors are 400 Horsepower and 106 to 317 Amps, respectively. At 557 Volts AC input voltage, the output power and the output current for line connected motors are 300 Horsepower and 106 to 317 Amps, respectively. At 575 Volts AC input voltage, the output power and the output current for Wye-Delta motors are 400 Horsepower and 183 to 549 Amps, respectively.

The rated heat dissipation during operation for the 150-S317NUD controller is 100 Watts. The controller dimensions are 51 x 36 x 14 inches. The controller is designed for mounting in a vertical orientation only. The enclosure of the 150-S317NUD controller is open and the recommended operating and storage temperature ranges are -4 to 122 degrees Fahrenheit and -13 to 167 degrees Fahrenheit, respectively. The operational shock and vibration ratings are 5.5 G and 1 G, respectively. The non-operational shock and vibration ratings are 25 G and 2.5 G, respectively. The control voltage range for the 150-S317NUD controller is 100 to 240 Volts AC. The integrated control I/Os on the controller are relay outputs (two) and 24 Volts DC inputs (two). Several operating modes are supported by the 150-S317NUD controller, including the soft start, soft stop, full voltage start, and torque control.