150-S480NBR

The Allen-Bradley 150-S480NBR Controller is an SMC-50 Smart Motor Controller with an internal bypass. It has a controller rating of 480 Amps, an input line voltage of 200 to 480 Volts AC at 50 to 60 Hertz frequency, and a control module power voltage of 24 Volts DC (two 24 Volts DC inputs and two relay outputs are the standard I/O). It has a frame size of 5, an open enclosure, and three-phase control. It is compatible with delta-connected motors and line-connected motors. The Allen-Bradley 150-S480NBR SMC-50 has various performance and operating modes such as the Starting Modes, Stopping Modes, Slow Speed Modes, Braking Modes, and the Special Running Modes. The Starting Modes include the soft start, pump control, linear speed acceleration, dual ramp start, torque control start, full voltage start, current limit start, preset slow speed, selectable kickstart, and the integral motor winding heater mode.

The Stopping Modes for the 150-S480NBR SMC-50 Smart Motor Controller are the coast, pump stop, soft stop, and linear speed deceleration modes. The braking control modes include the Accu-stop, SMB smart motor braking, the slow speed with braking, and the external braking control mode. The Allen-Bradley 150-S480NBR SMC-50 Smart Motor Controller has operating ambient temperature ranges of -20 to 50 degrees Celsius (-4 to 122 degrees Fahrenheit) without derating and of -20 to 40 degrees Celsius (-4 to 104 degrees Fahrenheit) when enclosed. It has a transportation and storage temperature range from –25 to 75 degrees Celsius (-13 to 167 degrees Fahrenheit) and atmospheric protection with the ANSI/ISA - 71.04-2013; Class G3 Environment rating. It has a vertical mounting orientation and a Pollution Degree rating of 2.