The 150-F108NBDB Controller is a solid-state Smart Motor Controller (SMC) that has been designed and built by Allen-Bradley. This controller has a current rating of 108 Amps and a power rating of 75 Horsepower, with an input line voltage that can range between 200 and 460 Volts AC. Its control voltage ranges between 100 and 240 Volts AC, therefore, it is able to work with 110 Volts AC or 220 Volts AC rated inputs with no special adaptations required. The 150-F108NBDB Smart Motor Controller comes in an open construction style, so special precautions such as installing the device inside the proper enclosure will guarantee the correct performance of the device and also extend its operating life.

Motor controllers like the Allen-Bradley 150-F108NBDB Smart Motor Controller are the next step in motor control miniaturization, because they are designed for substituting costly electromechanical devices in many applications. The widely-used three-phase squirrel cage motors that are rated at 200 to 460 Volts AC at 50 to 60 Hertz can be controlled by using the 150-F108NBDB Smart Motor Controller. Benefits such as a reduced footprint, inventory simplification, extended operating lifetime, and simplified troubleshooting are some of the advantages of upgrading legacy motor starters with the 150-F108NBDB Smart Motor Controllers. When properly configured, this smart motor controller will save energy since it is designed to optimize power utilization in the motors. The installation and commissioning process of this controller should always be performed by qualified personnel following all the national and local safety standards and regulations to avoid electrical discharges, damage, and injuries.