The Allen-Bradley 150-F25FCD SMC-Flex Smart Motor Controller is a solid-state smart motor controller with A NEMA Type 4/12 (IP65) rated enclosure used for providing a microcomputer start for a 3-phase induction motor. It has a modular design which makes installation and maintenance easy and the controller, like every other in the series, has built-in connections, and a DPI communication interface that allows for connection to several network types (DeviceNet, ControlNet, Ethernet, Remote I/O, and Profibus). The 150-F25FCD has controller ratings of 25A, and 15HP at 489V AC, with an input range of 500V AC to 570V AC at 50/60Hz. It has a power circuit with a -15% to +10% input tolerance, and a dielectric withstand of 2,200V AC. The 150-F25FCD has a short-circuit rating of 30KA-based on 700A Class J fuse, and it provides DV/DT protection with an RC Snubber Network and a transient line protection using Metal Oxide Varistor. The Controller has a control circuit, with 120 to 240V AC control voltage, and a dielectric withstand of 1600V. It has 4 programmable relay controls with 1 NO/NC contact configured for normal, up to speed, and external bypass.

The 150-F25FCD controller features 7 operating modes (soft start, current limit start, dual ramp, full voltage, linear spear acceleration, pre-set slow speed, and soft stop), and it comes with a keypad and LCD for programming and control. The controller also has a DPI communication interface for connection to optional human interface modules and it can also be programmed using PC-based software with network capability, which can be downloaded directly to the controller. The 150-F25FCD controller provides protective features like protection against voltage unbalance, under voltage, over voltage, over temperature, stall protection, and jam detection, and it has LED light indicators which shows the controller's status. Its operating temperature range is -5 to 40°C (+23 to 104°F), at 5 to 95% non-condensing relative humidity, and it has a storage temperature range of –20 to 75°C. The controller can withstand 15G of operating shock for 11ms, and a vibration of 1G, and it can retain standard operations at a maximum installation height of 1000m. The 150-F25FCD is CE, UL, and cUL-us certified, and it has a net weight of 5.5 Kg, with a shipping volume of 610mm x 406mm x 254mm.