The Allen Bradley 150-F317NZD SMC-Flex Smart Motor Starter, is an intelligent solid-state smart motor controller, which provides microprocessor digital control of 3-phase induction motors in many industrial applications. This motor starter features SRC based motor control in a very compact and cost-effective package, with 7 standard starting and stop operation modes within this compact package, and it provides both stall protection and jam detection, with overload protection for enhanced motor and system protection. The 150-F317NZD has a rating of 317 Amps output current and 250 Horsepower output power at 460 Volt AC input, and it has an acceptable 3-phase AC line input range of 230 to 690 Volt AC. It has a stand-alone power circuit with IEC rated impulse voltage of 6000 Volts, and with a dielectric withstand of 2,200 Volts. This power circuit is designed to withstand 1800 Volt peak inverse voltage and is protected from DV/DT voltage spikes via installed Resistor/Capacitor (RC) Snubber Network. It also has a stand-alone control circuit with 100 to 240 Volt AC operating voltage and with 80 Volt AC and 50 Volt AC input ON and OFF state voltage.

The 150-F317NZD has built-in DPI communication interface with serial communication port which allows for communication to Human-Module Interface (HMI) and various communication modules, and it can easily be configured via the 2 lines by 16 characters front LCD display and fixed programming keypad. It can also be programmed via software configured parameter values which are downloaded directly via DPI connected communication modules, and it has 4 programmable Auxiliary contact outputs (1 N.O/N.C) which can be programmed for Normal, Up-to-Speed, External Bypass, Fault, Alarm, or Network operation. The 150-F317NZD has a rated operating temperature range of -5 to +50 degree Celsius (23 to +122 degree Fahrenheit) in open enclosure rating, and it has a storage range of -20 to +75 degree Celsius (-4 to 167 degree Fahrenheit). The 150-F317NZD averagely weighs 45.8 Kilogram, with a total shipping dimension of 600.0 x 290.0 x 276.5 millimeters (HxWxD), and it is UL, CSA, and CE certified.