The Allen-Bradley 150-F480FHD is a three-phase SMC Flex solid-state, enclosed non-combination smart motor controller with controller ratings consisting of 400 HP and 480 A at 460V AC. This enclosed controller has a 200 to 208V AC three-phase input line voltage at 50 and 60 Hz line frequency and 100 to 240V AC control voltage. Note that when using the 150-F480FHD controller with both standard squirrel-cage induction motors and Wye-delta, six-lead motors, it is important that users provide a separate single-phase control source, specifically with a voltage of 100 to 240V AC at 50 and 60 Hz. This controller also has a motor current range of 160 to 480 A and 150 maximum HP at 60 Hz at a rated voltage of 200/208V AC. Room temperatures of the 150-F480FHD controller should be between -20 and 75 °C when not in operation and between -5 and 40 °C when operational.

The 150-F480FHD controller also allows users to select what start and stop modes to use and users can choose from preset slow speed, dual ramp, soft stop, soft start, full voltage, current limit start, and linear speed acceleration. Installed on the controller is a keypad input located at the front, a backlit LCD, 4 auxiliary contacts that are fully programmable, and status indicators. Faults that the 150-F480FHD controller can detect include power loss, voltage unbalance, communication fault, undervoltage, overvoltage, excessive starts per hour, underload, overload, phase reversal, controller temp, stall, line fault, jam, and open gate.