The 150-F625JBE is an Allen-Bradley Solid-State Controller from the SMC-Flex series. This module belongs to the group of Non-Combination Controllers that have line and load terminals. The enclosure type for this Solid-State Controllers is an IP65 (Type 4/12) rated enclosure. This module has a controller rating of 625 A and 500 Hp, for 460 Volts AC. The input line voltage for 3-phase input is 400 to 460 Volts AC at a frequency of 50 to 60 Hertz.

This Smart Motor Controller by Allen Bradley is designed to start and stop the standard 3-phase squirrel-cage induction motors and wye-delta motors. The 150-F625JBE has various features for these operations, namely soft start, kick start, current limit start, dual ramp start, and full voltage start. Some of the optional modes of operation for the 150-F625JBE include both pump and braking control, and the programming for the 150-F625JBE is done through a five-button keypad. This unit’s three-line by 16-character backlit LCD enables the module’s user to perform and complete the controller’s set-up relatively quickly and easily. Various protective features such as this module’s electronic motor overload protection, under voltage protection, voltage unbalance protection, and stall and jam protection are also offered by the Solid-State Controllers; these protection features will greatly help to monitor the module’s applications, as well as helping the user avoid potential performance issues. The 150-F625JBE also enables metering with its power monitoring parameters, such as parameters on motor thermal capacity usage, elapsed time, power factor, and three-phase current and voltage. This module also allows the users to program up to 99 starts per hour, which help to eliminate the motor stress caused by repetitive starting in short time span. This product also features an SCR/Run Bypass.