The 150-F625NCA is an open type motor. It has been manufactured by Allen Bradley under the SMC-Flex series. This part has an input voltage of 200 to 600 Volts AC. It has a controlled voltage of 230 to 240 Volts AC or 110 to 120 Volts AC and 50 to 60 Hertz. It gives out a voltage of 500 Hp at the voltage of 460 Volts AC. The part can be used with delta and line connected motors. The part is IP65 of Type 4/12. The enclosure rating of the part is 4, 4X which is used to identify the satisfaction level for ID code. It is protected from dust ingress and low pressure of water jets which can be sprayed from any direction in an industrial environment. The 150-F625NCA does not give any control options.

This controller for the part must be mounted at a vertical angle so that air can flow from it. This is to keep it air cooled during industrial processes. This should be done because while it is working, the 150-F625NCA produces waste heat. It must be installed in an enclosure which is free from dust and liquid which can become the cause of electric shock. Moreover, the temperature of the enclosure should be kept between 0 to 50 degrees Celsius. The 150-F625NCA is used to provide soft starting and stopping facilities for motors. It is used to make sure that motors do not start with a jerk and that damage is not caused to any part.