The Allen-Bradley 150-F625NZE is part of the SMC-Flex series and it is a solid-state controller with an open enclosure. It has an input voltage of 230-690V AC, 3-phase, at 50 and 60 Hz. It has a controller rating of 625 amperes and a horsepower rating of 500 HP at 460V AC. It also has a rated voltage of 690 /Y§V AC. The 150-F625NZE is an ideal part to be fitted into an existing industrial system. It helps to minimize the starting peak current and the control torque shock in the system. Its smart braking option helps to stop the motors within 2 minutes, unlike the coast-down time of 15 minutes. Its slow-speed operation makes it possible to inspect the saw blade tacking before the motor goes to full speed. The HIM helps to display any diagnostics within the system such as current, voltage, and power diagnostics. Its inbuilt programmable overload protection can adjust to high-inertia loads. The diagnostic system of this device helps to detect issues such as jams and stalls by shutting down the motors, which helps to prevent damage.

The 150-F625NZE’s features and functions are included in the standard control module. This includes the linear acceleration and deceleration, smart motor braking, energy saver, torque control energy saver mode, and pump control. This reduces the inventory and increases efficiency. The 150-F625NZE features a multicolored LED that portrays instant status display and assists during troubleshooting. Its optional communication modules let the device be connected to a number of networks. This includes the common DPI modules, Ethernet/IP, Control Net, and Device Net. It also features three hardware expansion ports that accept both optional digital and analog I/O expansion modules. The 150-F625NZE also accepts the protection modules such as the PTC and Ground Fault modules.