The three-phase Allen-Bradley 150-F85FBD is a solid-state SMC Flex enclosed non-combination smart motor controller which has a controller rating of 85 A, 60 HP at 460V AC. Its input line voltage ranges from 400 to 460V AC at 50 and 60 Hz, while its control voltage is from 100 to 240V AC. The motor current of the 150-F85FBD controller ranges from 17 to 85 A and it also has a kW rating of 45 kW at a maximum at 50 Hz and an HP rating of 60 HP at a maximum at 60 Hz, all at a voltage of 400/415/460V AC. A single-phase control source is required for this controller, particularly one with a 100 to 240V AC voltage at a frequency of 50 and 60 Hz. Operators can use the 150-F85FBD controller for Wye-delta, six-lead motors, as well as standard squirrel-cage induction motors. When in storage, the ambient temperature of the controller should fall within the -4 to 167 °F range and the temperature should be from 23 to 104 °F if the controller is being used.

Present on the 150-F85FBD controller are selectable starting and stopping modes and the available options include the dual ramp, the current limit start, the soft start, the linear speed acceleration, the preset slow speed, the full voltage start, and the soft stop. It is also equipped with a backlit LCD, a keypad placed on the front of the 150-F85FBD controller, status indicators, and 4 fully programmable auxiliary contacts. This controller is also able to detect various faults, including excessive starts, line faults, undervoltage, open gate, phase reversal, stall, overvoltage, overload, communication fault, underload, power loss, jam, controller temp, and voltage unbalance.