The 150-F85NCR is a smart motor controller manufactured and designed by Allen-Bradley. This specific controller belongs to the SMC-Flex product line, more specifically to the series B of soft starters. This product line presents this specific product as one of the most reliable motor controllers from Allen-Bradley. The Allen-Bradley 150-F85NCR smart motor controller operates with a control voltage of 24 Volts AC/DC and a line voltage that ranges from 200 to 600 Volts AC. It features an Amperage of 85 Amps and the control type for this drive is standard. The Allen-Bradley 150-F85NCR smart motor controller has different features and mechanisms to diagnose and communicate in an intelligent way all the parameters and signals that are required to start and control a motor in a soft, smooth, and safe manner.

The Allen-Bradley 150-F85NCR smart motor controller features a special motor braking option that enables it to stop the motor in less time than the standard time (2 minutes versus 15 minutes); at the same time, this module reduces torque shock to the system, offering safer operations to both, the controller and the motor. The ideal application for this controller is where a band-saw is included, even though its industrial applications range from compressors to pumps and fans. There are certain ideal conditions for the correct functioning of The Allen-Bradley 150-F85NCR smart motor controller, some of these are an ambient air temperature of 0-50°C a relative humidity of 95% and an altitude of 1000 meter. If the controller overpasses the temperature ranges, it may stop due to its protective heat thermistors and if the controller is used at altitudes higher than the recommended it could derate.