Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley SMC-Flex 152H-F25FHD-40

Product image is representative; revision or series may vary. Contact us to request a specific version.

152H-F25FHD-40

|
Need a Specific Revision?

The Allen-Bradley 152H-F25FHD-40 model is a solid-state controller from the SMC-Flex series. This unit incorporates a fusible disconnect for enhanced safety and is rated at 25 Amps, suitable for 15 horsepower at 460V AC.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 152H-F25FHD-40

ManufacturerAllen Bradley
CategoryDrives
Product LineSMC-Flex
Part Number152H-F25FHD-40
Weight100.00 lbs (45.36 kg)
Bulletin NumberSolid-State Controller with Fusible Disconnect
Enclosure TypeIP65 (Type 4/12)
Controller Rating25 A, 15 Hp at 460V AC
Input Line Voltage200-208V AC, 3-phase, 50 and 60 Hz
Control Voltage120V AC
Rated Voltage200V AC
Control TypeStandard
Hp Rating7.5
View as PDF
Request a Repair

Part number 152H-F25FHD-40 from Allen-Bradley belongs to the SMC-Flex product line. This solid-state controller is built with a built-in fusible disconnect, making it an excellent choice for various applications that require safety. It provides a controller rating of 25 A, thereby addressing moderate electrical loads. When working at 460V AC, it can handle up to 15 horsepower. The device functions properly within a 3-phase input line voltage of 200-208V AC, making it versatile for different setups. Moreover, it operates efficiently in environments with a nominal frequency of 50 or 60 Hz.

This controller also utilizes a control voltage of 120V AC and has a rated voltage of 200V AC, allowing it to integrate smoothly with different systems. For further adaptability, the horsepower rating is standardized at 7.5. The enclosure is rated at IP65 (Type 4/12), which provides excellent protection against dust and water ingress, making it ideal for use in demanding settings where durability and reliability are essential.

Revision Part #Also known as
152H-F25FHD-40 Ser A152H-F25FHD-40/A, Series A, Rev A
Don't see your particular revision? Contact us now.