150-A135NBD

The Allen-Bradley 150-A135NBD is a motor soft-starter that is part of the SMC Plus Smart Motor Controllers. This soft-starter is capable of implementing Soft-start; Soft-start with selectable kick-start; Current limit-start; Dual Ramp Start; Full voltage start; and Energy saver. It also comes with integrated motor protection, metering functionality and installed with a Keypad programming interface and an LCD display. Additionally, the 150-A135NBD may be added with Soft-stop; Pump-control; Preset-slow speed; Smart Motor Braking (SMB); Accu-stop position control and slow-speed with braking. The 150-A135NBD has an operating voltage range of 208-480VAC, 3-Phase, 47-63 Hz. It delivers continuous current rating of 135 Amperes and maximum kW ratings of 37 kW @ 200 VAC; 55 kW @ 400 VAC and 90 kW @ 500 VAC while the Maximum Hp ratings are 40 Hp @ 200 VAC; 50 Hp @ 230 VAC; 100 Hp @ 460 VAC. The device’ control module voltage is power requirement is 30 VA and integrated One (1) Normally Open (N.O.) contact and One (1) Normally Closed (N.C.) contact with similar voltage ratings of 240 VAC (max) and 24 VAC (min). This device is an Open type controller open type enclosure and supports direct panel mounting via the provided mounting screw holes. It has a maximum heat dissipation of 150 Watts. Selectable times include 2, 5, 10, 20, 25 & 30 seconds for Soft-start; 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0 for Selectable soft-start; 2, 5, 10, 20, 25, 30, 40, 50, 60 seconds for soft-stop; Other starting and stopping modes also comes with adjustable parameters.

The solid-state Allen-Bradley 150-A135NBD is an open-type, non-combination smart motor controller from the SMC PLUS line of controllers. This series of controllers have a self-calibration feature and it offers a reliable performance despite its smaller stature. They are also equipped with LED status indicators and configurable auxiliary contacts and it offers digital adjustments and energy saver features, with the latter automatically activated when the controllers have detected low load conditions. Three modes of operation are standard to this series, and users can choose from the full voltage start, soft start with kickstart, and the current limit start when using the 150-A135NBD controller. The three-phase input line voltage of this controller ranges from 200 to 460 Volts AC at a 50 and 60 Hertz line frequency, while its controller rating consists of 135 Amps and 5 to 100 Horsepower at 460 Volts AC. When using this controller, make sure that it is connected to a separate single-phase control source with a 100 to 240 Volts AC voltage range at a frequency of 50 to 60 Hertz. The 150-A135NBD controller, at an input of up to 460 Volts AC, has a 135 Amps current rating, 37 kW at 230 Volts AC at 50 Hertz, 75 kW at 400 Volts AC at 50 Hertz, 5 to 40 Horsepower at 200 Volts AC at 60 Hertz, 5 to 50 Horsepower at 230 Volts AC at 60 Hertz, and 5 to 100 Horsepower at 460 Volts AC at 60 Hertz. Measuring approximately 9.75 x 13.25 x 9.06 inches, the 150-A135NBD controller has a shipping weight of around 26 pounds.