100-D110ED11

The 100-D110ED11 contactor is a non-reversing 100 series contactor that has been designed by Allen-Bradley/Rockwell Automation. This contactor can operate with low-energy applications or any feedback control circuit that includes multiple series-connected N.C. auxiliary contacts. This contactor model comes with a mirror contact design that enables it to be always active regardless of the current status of any of the contacts. It comes with 3 contacts and a place for 2 additional contacts. The Allen-Bradley/Rockwell Automation 100-D110ED11 non-reversing contactor operates with an AC voltage and comes with an electronic coil and electronic interface setting. This contactor can be panel-mounted and an additional IP 20 rated enclosure can be added if the operating environment is harsh. This enclosure will help impede the entrance of dirt and dust particles into the contactor.

The Allen-Bradley/Rockwell Automation 100-D110ED11 non-reversing contactor can be combined with different protection components to amplify the protective spectrum in an application. It can be combined with circuit breakers and overload relays when required. The Allen-Bradley/Rockwell Automation 100-D110ED11 non-reversing contactor comes with a simple design that makes it easy to select and apply, even if accessories are used. The voltage range for this contactor goes from 110 to 130 Volts AC and it operates with a frequency of 50 to 60 Hertz. The active power load used by the contactor varies according to the room temperature. It is not recommended to have the device operating with a temperature above 60 degrees Celsius. If the ambient temperature is consistently within the highest limits of the rated operating temperature range, it is recommended to install ventilation equipment that helps to avoid overheating and damage.