We are closed on Friday, July 3 for Independence Day
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 100 Contactors 100-D180

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D180

|
Need a Specific Revision?

The 100-D180 is an Allen-Bradley 100 contactor. The rated current for the 100-D180 contactor is 180 Amps. The coil needs to be ordered separately for the 100-D180 contactor.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D180

ManufacturerAllen Bradley
Product TypeContactor
Product Line100 Contactors
Part Number100-D180
Weight7.69 lbs (3.49 kg)
Rated Current180 Amps
CoilNo
Contacts3
Auxiliary ContactsNone
Isolation Voltage1000 Volts
Operating Temperature-25 to 60 degrees Celsius
Storage Temperature-40 to 80 degrees Celsius
Maximum Altitude2000 meters
Request a Repair

The Allen-Bradley 100-D180 contactor is a Bulletin 100-D contactor which provides a highly compact and flexible starter component system. The 100-D180 contactor is a non-reversing contactor rated for 180 Amps at 60 degrees Celsius and 400 Volts AC and 250 Amps at 40 degrees Celsius and 690 Volts AC. There are no auxiliary contacts on the contactor. The 100-D180 contactor has 3 main contacts. The coil for the 100-D180 contactor needs to be ordered separately. Either a conventional or electronic coil can be ordered for the contactor. For conventional coils, the supported voltage ranges are 24 Volts AC, 48 Volts AC, 110 Volts AC, 120 Volts AC, 208 Volts AC, 220 to 230 Volts AC, 240 Volts AC, 277 Volts AC, 380 to 480 Volts AC, 415 Volts AC, 440 Volts AC, 480 Volts AC, 500 Volts AC, 550 Volts AC, and 600 Volts AC.

For electronic coils, the supported AC voltages on the Allen-Bradley 100-D180 contactor are 24 Volts AC, 42 to 64 Volts AC, 110 to 30 Volts AC, 208 to 277 Volts AC, and 380 to 500 Volts AC. For conventional DC coils, the supported voltages are 24 Volts DC, 48 Volts Dc, 110 volts DC, 125 Volts DC, and 220 Volts DC. For electronics DC coils, the supported voltages are 24 Volts DC, 48 to 72 Volts DC, 110 to 130 Volts DC, and 200 to 255 Volts DC. The Bulletin 100S-D contactors such as the 100-D180 contactor use a mirror contact design which prevents state change for normally closed contacts if a power contact on the 100-D180 contactor welds.