100-D300ED11

The 100-D300ED11 contactor is a 3-pole IEC contactor unit from the Allen-Bradley 100 Contactors product line. It has a current rating of 300 Amps and voltage rating of 110 to 130 Volts AC. It comes with an electronic coil and it also comes with auxiliary contacts. An electronic interface is present in this contactor module. The contactor comes with 1 normally open contactor, and 1 normally closed contact. The contactor can be used with both single-phase and 3-phase devices. The 100-D300ED11 contactor has an operating frequency between 50 and 60 Hertz depending on the load. The contactor can work with both non-reversing and reversing functions. It can be easily mounted by using a panel or using a DIN Rail that is 35 millimeters ling. The contactor is compatible with both AC and DC PLC interfaces. It has been certified with the EN/IEC, CE, cULus, CCC, EAC, and other standards.

The Allen-Bradley 100-D300ED11 contactor comes with terminal lugs, terminal shields, and connecting bars that can be used as optional accessories. The mechanical latches and interlocks for this contactor are also easy to use. The 100-D300ED11 contactor is equipped with an integrated surge suppressor that helps to control unwanted surges during the coil drop off. The IEC contactor is compatible with the Allen-Bradley Bulletin 193K bimetallic overload relay. It can easily handle commercial and lightweight industrial applications. It has a small form factor and it can be installed even in small places. The 100-D300ED11 contactor uses a timer unit that includes a 35-millimeter hat rail adapter. The environmental temperature should always be set between 0 and 40 degrees Celsius. The contactor should not be exposed to sources of high heat or high levels of EMC noise.