Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 100 Contactors 100-D300EN11

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D300EN11

|
Need a Specific Revision?

The Allen-Bradley 100-D300EN11 is an Allen Bradley 100 series IEC contactor unit. It has a voltage rating of 600 Volts AC. It comes with 1 NC contact, 1 NO contact, and an auxiliary contact.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D300EN11

ManufacturerAllen Bradley
CategoryMotors
Product Line100 Contactors
Part Number100-D300EN11
Weight15.00 lbs (6.80 kg)
DescriptionIEC Contactor
Current300 Amps
Voltage600 Volts AC
Contacts1 NO, 1 NC, 1 Auxiliary
Temperature0-40 degrees Celsius
Compatible Devices100-D Motor Control System
MountingDIN Rail/Panel
Poles3
Phases3
Request a Repair

The Allen-Bradley 100-D300EN11 contactor is a 3-pole AC operator contactor. It comes with 3 main contacts and it comes with both conventional and electronic AC coils. This 100 series IEC contactor device is used with the Allen-Bradley Bulletin 100-D drive series. It has a current rating of 300 Amps. This 3-phase contactor has a voltage rating of 600 Volts AC. The frequency of the electronic coil is 50 to 60 Hertz, depending on the applied load. The 100-D300EN11 contactor has a small form factor and it can be easily installed in small spaces. It comes with 1 NO contactor, 1 NC contactor, and 1 auxiliary contactor and it is suitable for several kinds of motor control systems. The contactor has different power ratings for different voltage ratings. Because it supports different voltage ratings, it is able to meet the needs of different applications.

The Allen-Bradley 100-D300EN11 contactor from the 100 series is CE certified and it is suitable for use with circuits capable of delivering 18,000 Volts RMS. The contactor can be mounted using a panel mount or a 35-millimeter DIN rail. The 100-D300EN11 contactor is enclosed inside a waterproof enclosure and it is suitable for both indoor and outdoor use. During the installation process, it should be fully disconnected from the mains power. It should not be exposed to sources of high heat and EMC noise. The environmental temperature should be set between 0 and 40 degrees Celsius for optimal operation. The 100-D300EN11 contactor comes with a surge suppressor that is a plug-in device and that helps to limit unwanted surge voltage during the coil drop off. It also supports ECO connecting modules for DOL and reverse starters.