100-D95D11

The 100-D95D11 Contactor is a Bulletin 100-D IEC contactor designed by Allen-Bradley/Rockwell Automation. It has a voltage rating of 600 Volts and a current rating of 95 Amps. The frequency rating of the module is 50 or 60 Hertz. The 100-D95D11 Contactor has a compact and space-saving design. It has a low power consumption rating that saves energy. It is designed to meet the requirements of the UL, CSA, and IEC standards. The 100-D95D11 Contactor uses common accessories that are available for all sizes and types of Bulletin 100-D IEC contactors. It provides non-reversible coil terminations. The auxiliary contacts of the contactor are side-mounted contacts that come without IEC sequence terminal designations. The maximum permissible current rating of the contactor is 860 Amps.

The 100-D95D11 Contactor has 110/120 Volts of rated coil voltage. It comes with an environmentally friendly contact structure and a reliable design. This 3-phase magnetic contactor has 1 NO contact and 1 NC contact. The insulation class of the coil is Class B. It has a -40 to 80 degrees Celsius storage temperature range and -25 to 60 degrees Celsius operating temperature  range at the rated voltage. It provides thru-hole and threaded screw terminals. However, it does not offer spring terminals. This non-reversing 100-D95D11 Magnetic Contactor has 3 poles. Its electronic-compatible auxiliary contacts are suitable for switching low-power control circuits. It provides a suppressor module for limiting the surge voltage when the coil circuits get interrupted. The surge suppressors are rated to use with both conventional and electronic coils. It is specifically designed for panel mounting. The terminals blocks are rated for an IP 20 of protection rating. This module is one of the best available solutions for motor control systems.