Product image is representative; revision or series may vary. Contact us to request a specific version.
The 100L-C20ND8 industrial contactor is marked with an IEC standard and it has an open enclosure. The unit is manufactured by Allen-Bradley/Rockwell Automation. The 100L-C20ND8 contactor is used for lighting and similar non-motor applications and it has a current rating of 20 Amps. The unit features 8 poles and a coil voltage of 110 to 120 Volts AC.
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
Repairs and exchanges are available for all automation products.
Drop shipping, blind shipping, and account shipping with no extra fees.
| Manufacturer | Allen Bradley |
|---|---|
| Category | Motors |
| Product Line | 100 Contactors |
| Part Number | 100L-C20ND8 |
| Weight | 3.00 lbs (1.36 kg) |
| Enclosure Rating | Open |
| Type | Electronically-Held |
| Applications | Lighting and other Non-Motor Applications |
| Current Rating | 20 Amps |
| Number of Poles | 8 |
| Auxiliary Hold-In Contact | No |
| Coil Voltage | 110 to 120 Volts AC |
| Frequency | 50 to 60 Hertz |
| Standards Compliance | CSA C22.2 (No. 14), UL 508 |
| Certifications | CE, cULus |
The product code 100L-C20ND8 is reserved for an Allen-Bradley/Rockwell Automation contactor unit that is used for various industrial applications. This IEC contactor is reliable and it provides flexible operation which ensures a high level of performance. The 100L-C20ND8 contactor is built with an open enclosure, but it can be installed in a stronger enclosure for more protection. The contactors from the 100L product line are available with the following enclosure markings: IP 42 (Type 1) and IP 66 (Type 3/4/12). The IP 42 enclosure includes a lift-off cover and the IP 66 enclosure includes a hinged cover. The 100L-C20ND8 contactor is held electronically and it has a maximum current of 20 Amps. In addition to that, the continuous current rating of the drive is 30 Amps.
The 100L-C20ND8 contactor has 8 poles and it comes without the auxiliary hold-in contact that is available for some units. The coil voltage of the unit is 110 to 120 Volts AC and the frequency is 50 to 60 Hertz. In the 100L series, the featured low voltage starters with a maximum voltage of 600 Volts are available with special features and factory-installed modifications which can further enhance their capabilities. The 100L series offers a wide range of devices built according to industrial standards. These devices are cULus listed and they are in compliance with standards such as the UL 508, IEC, and CSA C22.2 (No. 14) standards. The applications for which this contactor is used are primarily non-motor applications such as applications in different kinds of water heaters, tungsten filament lighting loads, and general lighting applications.