100S-C85DJ22C

The Allen-Bradley 100S-C85DJ22C Safety Contactor is a safety contactor device that is designed to provide mechanically-linked, positively guided contacts that meet the needs of modern-day safety and feedback circuit applications. These mechanically-linked auxiliary contacts do not change their state even when the power pole welds. The 100S-C85DJ22C Safety Contactor features mechanically-linked normally closed auxiliary contacts that remain steady when the power poles weld. This feature ensures the reliability of the open/closed status of the power poles. Each auxiliary contact is made of bifurcated gold-plated contacts that ensure high contact reliability and makes them ideally suited for low energy applications or feedback control circuits. The 100S-C85DJ22C Safety Contactor has 3 main power poles that can be wired for DIN rail or panel mount. It has 2 standard cross-stamped front-mounted auxiliary contacts. These contacts are normally closed contacts with positively guided contacts that meet the IEC standards.

The Allen-Bradley 100S-C85DJ22C Safety Contactor also has 2 positively guided normally open contacts with restricted guidance. The 100S-C85DJ22C Safety Contactor has a switching voltage rating from 230 to 690 Volts AC. This wide operating range allows for a wide range of applications. The 100S-C85DJ22C Safety Contactor is rated for 85 Amps of current at 415 Volts AC (3-phase, 50/60 Hertz) and it has a power rating of 45 kilowatts. The 100S-C85DJ22C Safety Contactor has an insulation voltage rating of 690 Volts (IEC) and a maximum impulse rating of 8,000 Volts. The 100S-C85DJ22C Safety Contactor comes with a 24 Volts DC operated coil. This coil has line side terminals and an integrated diode. The 100S-C85DJ22C Safety Contactor comes with a permanently installed casing that hinders unauthorized manual operation. It has an IP 20 industrial protection rating and comes with a red contact housing for easy identification.