100S-D180D22BC

The 100S-D180D22BC contactor is a safety contactor for the IEC motor control devices from the Allen-Bradley 100 Contactors series. This part comes specifically from the 100S-D product line within the 100 Contactors series. Before selecting 100S-D180D22BC contactor or any other contactor for an application, the specific load rating, utilization category, and the required electrical life of the application need to be taken into account to ensure that the contactor is fully compatible with the desired application. The lifespan of the contactor will depend on different variables such as the environmental conditions of the place where the contactor  is going to be installed, the application itself, and the details of the duty cycle. The Allen-Bradley/Rockwell Automation 100S-D180D22BC safety contactor operates with a voltage rating of 120 Volts AC and a current rating of 180 Amps at 60 degrees Celsius and 250 Amps at 40 degrees Celsius.

The Allen-Bradley/Rockwell Automation 100S-D180D22BC safety contactor can operate at full power at a room temperature of -25 to 60 degrees Celsius. It can also be used at higher temperatures, but its output rating needs to be reduced by at least 15% for every 10 degrees Celsius so it can operate properly. The Allen-Bradley/Rockwell Automation 100S-D180D22BC safety contactor comes with 2 normally closed contacts and 2 normally open contacts. These contacts operate with a mirror contact mechanism that enables them to operate independently from one another. This mechanism provides safety whether one of the contacts is closed or not. The contacts of the Allen-Bradley/Rockwell Automation 100S-D180D22BC safety contactor are gold plated and they come with a bifurcated design. The contactor comes in a compact design and it can be installed on almost any surface as long as the required environmental conditions are met.