Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 100 Contactors 100S-D180EA22C

Product image is representative; revision or series may vary. Contact us to request a specific version.

100S-D180EA22C

|
Need a Specific Revision?

The Allen-Bradley 100S-D180EA22C contactor is a 3-pole 100 series AC contactor. Its rated current is 180 Amps at 60 degrees Celsius. The 100S-D180EA22C contactor includes a PLC interface.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100S-D180EA22C

ManufacturerAllen Bradley
Product TypeContactor
Product Line100 Contactors
Part Number100S-D180EA22C
Weight8.94 lbs (4.05 kg)
CoilElectronic
Coil Voltage208 to 277 Volts AC
Poles3
PLC InterfaceYes
Current Rating180 Amps
Altitude2000 Meters
Storage Temperature-25 to 60 degrees Celsius
Operating Temperature-40 to 80 degrees Celsius
NC Contacts2
Request a Repair

The Allen-Bradley 100S-D180EA22C contactor is a safety contactor. Its rated operational current at 60 degrees Celsius and 400 Volts AC is 180 Amps. Its rated operational current at 40 degrees Celsius and 690 Volts AC is 250 Amps. The 100S-D180EA22C contactor can support the following output power ratings for AC motors at 50 Hertz frequency: 55 kilowatts at 230 Volts AC, 101 kilowatts at 400 Volts AC, 100 kilowatts at 15 Volts AC, 90 kilowatts at 500 Volts AC, 132 kilowatts at 690 Volts AC, 90 kilowatts at 1000 Volts AC, and 50 kilowatts at 200 Volts AC. The 100S-D180EA22C contactor can support the following ratings for AC motors at 60 Hertz frequency, 60 Horsepower at 230 Volts AC, 150 Horsepower at 460 Volts AC, and 150 Horsepower at 575 Volts AC.

The 100S-D180EA22C contactor is equipped with 2 normally open contacts and 2 normally closed contacts. The 100S-D180EA22C contactor is a 3-pole device. The coil on the contactor is of the electronic type. The Bulletin 100S-D contactors are designed with electronic or conventional coils and these contacts support AC or DC operation. Bulletin 100S-D contactors like the 100S-D180EA22C contactor include integrated PLC interfaces and they feature wide voltage ranges and lower power pick-up and hold-in functions. The Bulletin 100S-D contactors are designed for applications involving isolating switchgear which is used in hazardous motion loads. All contactors should be disconnected from their power source before they are serviced. Allen Bradley contactors are designed for installation inside a suitable enclosure for protection from contaminants. Phase barriers should be installed on the 100S-D180EA22C contactor before operation.