Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 100 Contactors 100S-D300EN22BC

Product image is representative; revision or series may vary. Contact us to request a specific version.

100S-D300EN22BC

|
Need a Specific Revision?

The 100S-D300EN22BC contactor is a safety contactor. It belongs to the Allen-Bradley 100S-D series. The 100S-D300EN22BC contactor comes with a PLC interface.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100S-D300EN22BC

ManufacturerAllen Bradley
Product TypeContactor
Product Line100 Contactors
Part Number100S-D300EN22BC
Weight12.00 lbs (5.44 kg)
CoilElectronic
Coil Voltage380 to 500 Volts AC
Rated Current300 Amps
Operating Temperature-25 to 60 degrees Celsius
Storage Temperature-40 to 80 degrees Celsius
Altitude2000 meters
NC Contacts2
NO Contacts2
Isolation Voltage1000 Volts
Request a Repair

The 100S-D300EN22BC contactor is an Allen-Bradley 100S-D series contactor. It comes with an electronic coil rated for 380 to 500 Volts AC. The rated isolation voltage for the 100S-D contactors per the IEC standards is 1000 Volts, and per the UL and CSA standards, it is 600 Volts. The rated impulse withstand voltage is 12 kilovolts. The coil on the 100S-D300EN22BC contactor is rated for Class B per the VDE 0660 standards. The storage temperature range for the contactor is from -40 to 80 degrees Celsius and the operating temperature range is from -25 to 60 degrees Celsius. The contactor can be operated with 15% reduced current values at up to 70 degrees Celsius (the 15% current reduction is relative to the current level at 60 degrees Celsius.) Allen-Bradley recommends 2000 meters as the maximum altitude for the installation site.

The 100S-D300EN22BC contactor has a total of 4 auxiliary contacts. Two of the contacts are normally closed and 2 are normally open. The shock rating for the 100S-D300EN22BC contactor is as per the IEC 60068-2-28 standards and vibration rating of the contactor is as per the IEC 60068-2-6 standards. The single contactor cover rating is IP 20 as per the IEC 60629 standards. The auxiliary contacts on the 100S-D300EN22BC contactor are IP 20 rated as per the IEC 60529 standards. The rated operating current for the contactor is 300 Amps at 60 degrees Celsius and 450 Amps at 40 degrees Celsius. The contactor includes an integrated PLC interface. The mirror contact design of the 100S-D300EN22BC contactor is designed to prevent state change of normally closed contactor contacts when a power contact on the contactor welds. The installation of the contactor should only be performed by trained technicians.