Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 100 Contactors 100S-D300EZJ22C

Product image is representative; revision or series may vary. Contact us to request a specific version.

100S-D300EZJ22C

|

TheĀ 100S-D300EZJ22C contactor is an Allen-Bradley 3-pole contactor. The coil on the contactor is electronically controlled. The coil voltage is 24 Volts DC.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100S-D300EZJ22C

ManufacturerAllen Bradley
Product TypeContactor
Product Line100 Contactors
Part Number100S-D300EZJ22C
Weight12.00 lbs (5.44 kg)
CoilElectronic
Coil Voltage24 Volts DC
Rated Current300 Amps
PLC InterfaceYes
NO Contacts2
NC Contacts2
Altitude2000 meters
Operating Temperature-25 to 60 degrees Celsius
Storage Temperature-40 to 80 degrees Celsius

The Allen-Bradley 100S-D300EZJ22C contactor is a contactor with a DC controlled coil. The rated voltage for the coil on the 100S-D300EZJ22C contactor is 24 Volts DC. The operating current for the 100S-D300EZJ22C contactor is 450 Amps at 40 degrees Celsius and 300 Amps at 60 degrees Celsius. Auxiliary contacts are provided on the 100S-D300EZJ22C contactor, specifically, 2 of each are provided of the normally open and normally closed varieties. The 100S-D300EZJ22C contactor can be used for the switching of 3-phase motors. For all motors rated at 60 Hertz line frequency, it can support 100 kilowatt-rated motors at 200 Volts, 125 kilowatt-rated motors at 230 Volts, 250 kilowatt-rated motors at 460 Volts, and 300 kilowatt-rated motors at 575 Volts. For all motors rated at 50 Hertz line frequency it can support 90 kilowatt-rated motors at 230 Volts, 170 kilowatt-rated motors at 400 Volts, and 290 kilowatt-rated motors at 500 Volts.

The coil on the Allen-Bradley 100S-D300EZJ22C contactor is electronically controlled. The height of the contactor is 190 millimeters, its width is 155 millimeters, and its depth is 180 millimeters. The 100S-D300EZJ22C contactor can be installed at elevations of up to 2000 meters above sea level. The ambient temperature recommendation for the storage of the contactor is from -40 to 80 degrees Celsius. The ambient temperature recommendation for operation of the contactor is from -25 to 60 degrees Celsius. If the ambient temperature reaches 70 degrees Celsius, the operational current for the 100S-D300EZJ22C contactor will reduce by 15% as compared to the rated current values supported at 60 degrees Celsius. Allen-Bradley recommends complete contactor power disconnection before the contactor is serviced for safety.