100S-D860ED22C

The Bulletin 100S-D series 100S-D860ED22C contactor is an 860 Amps rated 3-pole contactor. The coil on the contactor is electronically controlled and it is designed for operation at 110 to 130 Volts AC. The contactor can be used for motor control over a wide range of motor voltages and line frequencies. For 50 Hertz line frequencies, the 100S-D860ED22C contactor can be used for the control of motors rated for 250 kilowatts at 230 Volts, 500 kilowatts at 400 Volts, and 500 kilowatts at 500 Volts. For 60 Hertz line frequencies, the 100S-D860ED22C contactor can be used for motors rated for 250 Horsepower at 200 Volts, 300 Horsepower at 230 Volts, and 500 Horsepower at 460 Volts. All of the installation and maintenance activities related to the contactor should only be performed by trained technicians.

Allen-Bradley recommends that the technicians involved in the installation of the 100S-D860ED22C contactor follow all the safety precautions outlined in the instructions provided with the contactors. Allen-Bradley also recommends that the main power to the system using the contactors be shut off prior to the initiation of maintenance activities. This will help to prevent electric shock and will ensure the safety of the installation or maintenance technicians. The 100S-D860ED22C contactor is a 3-pole device. It features a total of 4 auxiliary contacts out of which 2 are normally open and 2 are normally closed. The isolation voltage rating for the 100S-D860ED22C contactor is 1000 Volts per the IEC standards. The impulse voltage withstand rating for the 100S-D860ED22C contactor is 12 kilovolts. For optimal operation, the 100S-D860ED22C contactor requires -25 to 60 degrees Celsius of ambient temperature.