The 103T-AWD2-RB63X-E1D Starter is an IEC Non-Reversing Combination Starter with a conventional coil. This non-reversing and direct on-line combination starter is manufactured by Allen-Bradley/Rockwell Automation as part of the Bulletin 103T product line in the Allen-Bradley 103 IEC Starters series. It has a contactor size of 100-C09 and it supports panel mounting. This starter has an AC coil voltage of 110 Volts AC at 50 Hertz frequency and 120 Volts AC at 60 Hertz frequency. Other specifications of the Allen-Bradley 103T-AWD2-RB63X-E1D IEC Non-Reversing Combination Starter include 1 Normally Open (NO) auxiliary contact and D Frame circuit breaker frame size. The unit has a circuit breaker current range of 4 to 6.3 Amps and it comes without any auxiliary trip contacts on the bottom front side. It features the Allen-Bradley 193-EE 3-component combination starter and an overload relay current range of 3.2 to 16 Amps. This combination starters offers overload protection, branch-circuit protection, and magnetic control as well as short-circuit protection for each motor circuit.

 

The general specifications of the Allen-Bradley/Rockwell Automation Bulletin 103T IEC combination starters, including the 103T-AWD2-RB63X-E1D IEC Non-Reversing Direct On-Line Combination Starter include a wide range of features and specifications. Some of these include but are not limited to optional factory installed components such as lockable handles, surge suppressors, control plugs, and trip/auxiliary indication contacts. The starters like the 103T-AWD2-RB63X-E1D IEC Non-Reversing Combination Starter are cULus listed to enable the protection as well as the control of standard motor loads. They operate on a current ranging between 0.1 and 90 Amps, and they are certified and listed for compliance with the UL, IEC, CSA, and CE standards.

This content was written and compiled by D O Supply and should not be copied.