104-C60D02 | Allen Bradley Motors 104 IEC Safety Contactors

104-C60D02

104-C60D02

Description:

The Allen-Bradley 104-C60D02 Reversing Contactor is an electro-mechanical motor starter device which provides a power supply to a motor in 2 directions: one for forwarding starting and the other for reverse starting. This is accomplished by using 2 contactors which can be wired in a wye or delta configuration. The contactor's output power rating is 20 Horsepower.

Rated 4.5 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 104-C60D02

Add more parts to quote

Description:

The Allen-Bradley 104-C60D02 Reversing Contactor is an electro-mechanical motor starter device which provides a power supply to a motor in 2 directions: one for forwarding starting and the other for reverse starting. This is accomplished by using 2 contactors which can be wired in a wye or delta configuration. The contactor's output power rating is 20 Horsepower.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 104-C60D02.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 6 reviews

    Technical Specifications for 104-C60D02

BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-C60D02
Product DescriptionReversing Contactor
Current Rating60 Amps
Horsepower Rating 20 HP
Power Supply Voltage Rating460 VAC
Phases3
Coil Voltage120 VAC
Number of Poles3
Number of Auxiliary Contacts2 NC Contacts
Mounting DIN Rail, Panel
Type of Connection TerminalsScrew Terminals
BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-C60D02
Product DescriptionReversing Contactor
Current Rating60 Amps
Horsepower Rating 20 HP
Power Supply Voltage Rating460 VAC
Phases3
Coil Voltage120 VAC
Number of Poles3
Number of Auxiliary Contacts2 NC Contacts
Mounting DIN Rail, Panel
Type of Connection TerminalsScrew Terminals
s

About 104-C60D02

The Allen-Bradley 104-C60D02 Reversing Contactor is a durable and reliable electro-mechanical device from the 104 IEC Safety Contactors series that is used to provide power for motors in a wide variety of industrial applications. More than a single contactor, the Allen-Bradley 104-C60D02 Reversing Contactor is a set of 2 independent contractors that have been combined to form a single device for convenience and efficiency. These contactors are connected to the same motor in a parallel formation, but with the wiring to terminals L1 and L3 installed between them with the goal of providing the electrical voltage required to rotate the motor in the forward and reverse directions when it is controlled by the individual contactors.  The wiring between the contactors and the motors can be configured in either the wye or delta connection styles.



 



The Allen-Bradley 104-C60D02 Reversing Contactor is used for applications where motors need to be able to rotate in the forward and backward directions for different stages of the machine operation process. With a single component for powering up the motor, the installation and troubleshooting processes in the application are simplified. The Allen-Bradley 104-C60D02 Reversing Contactor can be installed using a DIN Rail or a panel, and it is usually recommended to use panel installation in order to maintain a dry and clean operation environment. Reducing exposure to humidity and severe temperature variations is vital for extending the operating lifespan of the reversing contactor in an installation. Only properly trained electrical technicians should be allowed to perform maintenance operations to the reversing contactor while following all the recommended safety practices such as using  the appropriate locking and tagging procedures.



Repair Services for 104-C60D02

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-C60D02. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 104-C60D02

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 104-C60D02

Resolutions For 104-C60D02

About

Technical Specifications for 104-C60D02

BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-C60D02
Product DescriptionReversing Contactor
Current Rating60 Amps
Horsepower Rating 20 HP
Power Supply Voltage Rating460 VAC
Phases3
Coil Voltage120 VAC
Number of Poles3
Number of Auxiliary Contacts2 NC Contacts
Mounting DIN Rail, Panel
Type of Connection TerminalsScrew Terminals
BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-C60D02
Product DescriptionReversing Contactor
Current Rating60 Amps
Horsepower Rating 20 HP
Power Supply Voltage Rating460 VAC
Phases3
Coil Voltage120 VAC
Number of Poles3
Number of Auxiliary Contacts2 NC Contacts
Mounting DIN Rail, Panel
Type of Connection TerminalsScrew Terminals

About 104-C60D02

The Allen-Bradley 104-C60D02 Reversing Contactor is a durable and reliable electro-mechanical device from the 104 IEC Safety Contactors series that is used to provide power for motors in a wide variety of industrial applications. More than a single contactor, the Allen-Bradley 104-C60D02 Reversing Contactor is a set of 2 independent contractors that have been combined to form a single device for convenience and efficiency. These contactors are connected to the same motor in a parallel formation, but with the wiring to terminals L1 and L3 installed between them with the goal of providing the electrical voltage required to rotate the motor in the forward and reverse directions when it is controlled by the individual contactors.  The wiring between the contactors and the motors can be configured in either the wye or delta connection styles.



 



The Allen-Bradley 104-C60D02 Reversing Contactor is used for applications where motors need to be able to rotate in the forward and backward directions for different stages of the machine operation process. With a single component for powering up the motor, the installation and troubleshooting processes in the application are simplified. The Allen-Bradley 104-C60D02 Reversing Contactor can be installed using a DIN Rail or a panel, and it is usually recommended to use panel installation in order to maintain a dry and clean operation environment. Reducing exposure to humidity and severe temperature variations is vital for extending the operating lifespan of the reversing contactor in an installation. Only properly trained electrical technicians should be allowed to perform maintenance operations to the reversing contactor while following all the recommended safety practices such as using  the appropriate locking and tagging procedures.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-C60D02. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-C60D02. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF