104-C85J22 | Allen Bradley Motors 104 IEC Safety Contactors

104-C85J22

104-C85J22

Description:

The Allen-Bradley 104-C85J22 Reversing Contactor is an electrical motor starter which combines 2 independent contactors into a single unit that is capable of providing the host motor with the necessary voltage to rotate in one direction or the other. These 2 contactors are linked together by a mechanical interlock device and a shared mounting assembly but they need to be wired by the users according to the desired electrical specifications for an application. The contactor's Horsepower rating is 20 Horsepower.

Rated 4.6 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 104-C85J22

Add more parts to quote

Description:

The Allen-Bradley 104-C85J22 Reversing Contactor is an electrical motor starter which combines 2 independent contactors into a single unit that is capable of providing the host motor with the necessary voltage to rotate in one direction or the other. These 2 contactors are linked together by a mechanical interlock device and a shared mounting assembly but they need to be wired by the users according to the desired electrical specifications for an application. The contactor's Horsepower rating is 20 Horsepower.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 104-C85J22.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 18 reviews

    Technical Specifications for 104-C85J22

BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-C85J22
Product DescriptionReversing Contactor
Current Rating85 A
Horsepower Rating 20 HP
Power Supply Voltage Rating460V AC
Phases3
Coil Voltage24V DC
Number of Poles3
Number of Auxiliary Contacts1 NC Contact and 1 NO Contact
Mounting DIN Rail
Type of Connection TerminalsScrew Terminals
BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-C85J22
Product DescriptionReversing Contactor
Current Rating85 A
Horsepower Rating 20 HP
Power Supply Voltage Rating460V AC
Phases3
Coil Voltage24V DC
Number of Poles3
Number of Auxiliary Contacts1 NC Contact and 1 NO Contact
Mounting DIN Rail
Type of Connection TerminalsScrew Terminals
s

About 104-C85J22

The Allen-Bradley 104-C85J22 Reversing Contactor is an electromagnetic piece of machinery designed to automate the start of a motor and to let it rotate in either the forward or reverse directions by providing a set of 2 independent contactors that are wired in parallel to the load. Line terminals L1 and L3 are normally interchanged between 2 contactors in order to supply energy to the motor so that  it can rotate in either direction.  The Allen-Bradley 104-C85J22 Reversing Contactor has a maximum current rating of 85 Amps, a power supply voltage rating of 460 Volts AC, and a Horsepower rating of 20 Horsepower. It uses a 24 Volts DC coil to activate its contactors, which allows a safe operation in most modern electrical control applications, such as motion control in the manufacturing industry, and elevator control in residential or commercial applications.



 



The Allen-Bradley 104-C85J22 Reversing Contactor comes from the factory with 3 poles by the contactor in order to accommodate the 3-phase voltage connection leads. An extra set of 2 auxiliary contacts is also included by default, and one of them is normally closed and the other is normally open. The Allen-Bradley 104-C85J22 Reversing Contactor can be mounted inside an electrical cabinet or enclosure by using the built-in DIN-rail attachment, or directly on the panel. Basic maintenance operations for this device include cleaning the contractor's connection terminal, applying the torque specified by the manufacturer on the terminal screws, and making sure the enclosure provides enough protection for the device. Properly trained electrical technicians should be tasked with performing the maintenance, troubleshooting, or repair of motion control systems and components like the 104-C85J22 Reversing Contactor.



Repair Services for 104-C85J22

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-C85J22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 104-C85J22

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 104-C85J22

Resolutions For 104-C85J22

About

Technical Specifications for 104-C85J22

BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-C85J22
Product DescriptionReversing Contactor
Current Rating85 A
Horsepower Rating 20 HP
Power Supply Voltage Rating460V AC
Phases3
Coil Voltage24V DC
Number of Poles3
Number of Auxiliary Contacts1 NC Contact and 1 NO Contact
Mounting DIN Rail
Type of Connection TerminalsScrew Terminals
BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-C85J22
Product DescriptionReversing Contactor
Current Rating85 A
Horsepower Rating 20 HP
Power Supply Voltage Rating460V AC
Phases3
Coil Voltage24V DC
Number of Poles3
Number of Auxiliary Contacts1 NC Contact and 1 NO Contact
Mounting DIN Rail
Type of Connection TerminalsScrew Terminals

About 104-C85J22

The Allen-Bradley 104-C85J22 Reversing Contactor is an electromagnetic piece of machinery designed to automate the start of a motor and to let it rotate in either the forward or reverse directions by providing a set of 2 independent contactors that are wired in parallel to the load. Line terminals L1 and L3 are normally interchanged between 2 contactors in order to supply energy to the motor so that  it can rotate in either direction.  The Allen-Bradley 104-C85J22 Reversing Contactor has a maximum current rating of 85 Amps, a power supply voltage rating of 460 Volts AC, and a Horsepower rating of 20 Horsepower. It uses a 24 Volts DC coil to activate its contactors, which allows a safe operation in most modern electrical control applications, such as motion control in the manufacturing industry, and elevator control in residential or commercial applications.



 



The Allen-Bradley 104-C85J22 Reversing Contactor comes from the factory with 3 poles by the contactor in order to accommodate the 3-phase voltage connection leads. An extra set of 2 auxiliary contacts is also included by default, and one of them is normally closed and the other is normally open. The Allen-Bradley 104-C85J22 Reversing Contactor can be mounted inside an electrical cabinet or enclosure by using the built-in DIN-rail attachment, or directly on the panel. Basic maintenance operations for this device include cleaning the contractor's connection terminal, applying the torque specified by the manufacturer on the terminal screws, and making sure the enclosure provides enough protection for the device. Properly trained electrical technicians should be tasked with performing the maintenance, troubleshooting, or repair of motion control systems and components like the 104-C85J22 Reversing Contactor.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-C85J22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-C85J22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF