104-M12NKD31 | Allen Bradley Motors 104 IEC Safety Contactors

104-M12NKD31

104-M12NKD31

Description:

The Allen-Bradley 104-M12NKD31 contactor is a reversing contactor for different industries. It is a member of the 104 IEC Safety Contactors series. It has a current rating of 12 Amps.

Rated 4.8 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 104-M12NKD31

Add more parts to quote

Description:

The Allen-Bradley 104-M12NKD31 contactor is a reversing contactor for different industries. It is a member of the 104 IEC Safety Contactors series. It has a current rating of 12 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 104-M12NKD31.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 14 reviews

    Technical Specifications for 104-M12NKD31

BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-M12NKD31
Description Reversing Contactor
Voltage24 Volts
Current12 Amps
MountingPanel or DIN Rail
StandardsUL, CSA, IEC, CE
CompatibleBulletin 193K Overload Relay
Altitude2000 Meters
Temperature-25 to 60 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-M12NKD31
Description Reversing Contactor
Voltage24 Volts
Current12 Amps
MountingPanel or DIN Rail
StandardsUL, CSA, IEC, CE
CompatibleBulletin 193K Overload Relay
Altitude2000 Meters
Temperature-25 to 60 degrees Celsius
s

About 104-M12NKD31

The 104-M12NKD31 contactor is an Allen-Bradley manufactured 104 IEC contactor. It can run in both directions. A contactor is a remote switching device that works as a relay device. It can handle different types of loads. The reversing contactor comes with 2 identical contactors interlocked together on a single frame. It is an IEC rated unit with a current rating of 12 Amps. This reversing contactor is compact in size and IT has an AC coil voltage rating of 24 Volts. It pushes and pulls together the high-voltage contacts. The 104-M12NKD31 contactor is a 3-phase unit. The contactor has 3 independent poles. The main voltage through the main contacts is isolated by using the coil. It has an operating frequency of 50 to 60 Hertz that depends on the load that is applied during operation.



 



The 104-M12NKD31 contactor is certified with the UL, CSA, IEC, CE, and CCC standards. It comes with other industrial and environmental standards too. This reversing contactor can be easily mounted using a panel or a 35-millimeter DIN Rail. The temperature should always be set between -25 and 60 degrees Celsius for operation. The reversing contactor can be used at an altitude of up to 2000 meters. The 104-M12NKD31 contactor is equipped with surge suppressors and electronic timers. The reversing contactor has mechanical interlocks with 2 different contacts. It supports optional overload relays (electronic or bimetallic). The contacts offer IP 2X finger protection and they are fully compatible with the Bulletin 193K overload relays. The 104-M12NKD31 contactor has space saving coil terminations and features pneumatic timing modules. The contactor should never be exposed to heat sources and EMC noise.



Repair Services for 104-M12NKD31

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-M12NKD31. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 104-M12NKD31

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 104-M12NKD31

Resolutions For 104-M12NKD31

About

Technical Specifications for 104-M12NKD31

BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-M12NKD31
Description Reversing Contactor
Voltage24 Volts
Current12 Amps
MountingPanel or DIN Rail
StandardsUL, CSA, IEC, CE
CompatibleBulletin 193K Overload Relay
Altitude2000 Meters
Temperature-25 to 60 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104-M12NKD31
Description Reversing Contactor
Voltage24 Volts
Current12 Amps
MountingPanel or DIN Rail
StandardsUL, CSA, IEC, CE
CompatibleBulletin 193K Overload Relay
Altitude2000 Meters
Temperature-25 to 60 degrees Celsius

About 104-M12NKD31

The 104-M12NKD31 contactor is an Allen-Bradley manufactured 104 IEC contactor. It can run in both directions. A contactor is a remote switching device that works as a relay device. It can handle different types of loads. The reversing contactor comes with 2 identical contactors interlocked together on a single frame. It is an IEC rated unit with a current rating of 12 Amps. This reversing contactor is compact in size and IT has an AC coil voltage rating of 24 Volts. It pushes and pulls together the high-voltage contacts. The 104-M12NKD31 contactor is a 3-phase unit. The contactor has 3 independent poles. The main voltage through the main contacts is isolated by using the coil. It has an operating frequency of 50 to 60 Hertz that depends on the load that is applied during operation.



 



The 104-M12NKD31 contactor is certified with the UL, CSA, IEC, CE, and CCC standards. It comes with other industrial and environmental standards too. This reversing contactor can be easily mounted using a panel or a 35-millimeter DIN Rail. The temperature should always be set between -25 and 60 degrees Celsius for operation. The reversing contactor can be used at an altitude of up to 2000 meters. The 104-M12NKD31 contactor is equipped with surge suppressors and electronic timers. The reversing contactor has mechanical interlocks with 2 different contacts. It supports optional overload relays (electronic or bimetallic). The contacts offer IP 2X finger protection and they are fully compatible with the Bulletin 193K overload relays. The 104-M12NKD31 contactor has space saving coil terminations and features pneumatic timing modules. The contactor should never be exposed to heat sources and EMC noise.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-M12NKD31. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-M12NKD31. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF