The 104S-C16EJ210BC contactor is a 16 Amps rated IEC reversing contactor manufactured by Allen-Bradley. This line side contactor is used in industrial applications. The contactor has 2 identical contactors that are interlocked on a single frame. It is powered with a 24 Volts DC power supply. It comes with an electronic coil and has 1 NO and 5 NC auxiliary contacts. This 3-pole contactor can work with both single-phase and 3-phase power sources. The contactor comes with mechanically linked guided contacts. It is used in feedback circuits in different applications. The 104S-C16EJ210BC reversing contactor is certified with the C-Tick, CCC, and KC standards. This reversing contactor can be easily mounted with a panel or a 35-millimeter DIN Rail. 

The environmental temperature for storing the 104S-C16EJ210BC contactor should be set between -55 and 80 degrees Celsius and the operating temperature should be between -25 and 60 degrees Celsius. It should be operated in a corrosion free environment with zero EMC noise. It should never be exposed to sources of high heat. It can be easily operated at an altitude of up to 2000 meters. The 104S-C16EJ210BC contactor is equipped with surge suppressors that help to prevent damage from unwanted voltage spikes or transients. The suppressor is used with the alternating current utility line. The contacts have electronic timers and mechanical interlocks and latches. The 104S-C16EJ210BC contactor is fully compatible with the Bulletin 193K bimetallic overload relay. The reversing contactor supports circuits that can deliver 18,000 maximum RMS. For connections, the contactor uses 75 degrees rated copper wire.