104S-C23D210BC | Allen Bradley Motors 104 IEC Safety Contactors

104S-C23D210BC

104S-C23D210BC

Description:

The 104S-C23D210BC contactor is a safety reversing contactor by Allen-Bradley. It is a 104 IEC safety contactor. It has a current rating of 23 Amps.

Rated 4.6 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 104S-C23D210BC

Add more parts to quote

Description:

The 104S-C23D210BC contactor is a safety reversing contactor by Allen-Bradley. It is a 104 IEC safety contactor. It has a current rating of 23 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 104S-C23D210BC.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 19 reviews

    Technical Specifications for 104S-C23D210BC

BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104S-C23D210BC
DescriptionReversing Contactor
Current23 Amps
Voltage110/120 Volts
Frequency50/60 Hertz
StandardsUL, CSA, IEC, CE, CCC
Temperature-25 to 60 degrees Celsius
Altitude 2000 Meters
MountingPanel or DIN Rail
BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104S-C23D210BC
DescriptionReversing Contactor
Current23 Amps
Voltage110/120 Volts
Frequency50/60 Hertz
StandardsUL, CSA, IEC, CE, CCC
Temperature-25 to 60 degrees Celsius
Altitude 2000 Meters
MountingPanel or DIN Rail
s

About 104S-C23D210BC

The 104S-C23D210BC contactor is a 104 IEC series safety reversing contactor made by Allen-Bradley. The contactor has a current rating of 23 Amps. This line side contactor has 1 NO and 5 NC auxiliary contact circuits. It has a voltage rating of 110/120 Volts. For different voltage levels, the contactor has a variable operating frequency of 50/60 Hertz. It has different power ratings with different voltage levels. This IEC certified contactor has 3 main contactors and it is equipped with both mechanical and electrical interlocks. It comes with reversing power wiring. The 104S-C23D210BC contactor is a 3-phase unit with a small form factor. It can easily be installed in small spaces and it saves expensive panel space. It can be mounted with a DIN rail or panel. The contactor is certified with the UL, CSA, IEC, CE, and CCC standards.



 



The contacts of the Allen-Bradley 104S-C23D210BC 104 IEC series contactor are located on both the top and bottom side of the contactor. During the installation, the main power should be fully disconnected and the contactor should be properly grounded. The contactor is equipped with a high-performance surge suppressor that protects the unit from transients or voltage spikes. It has mechanical interlocks and latches that are designed to be efficient. The 104S-C23D210BC contactor has 3 main poles and comes with 2 identical contactor units inside it. It has terminal lugs and shields made of high quality materials. The environmental temperature should always be set between - 25 and 60 degrees Celsius for use in an environment with no condensation. It can be used at an altitude of 2000 meters above sea level.



Repair Services for 104S-C23D210BC

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104S-C23D210BC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 104S-C23D210BC

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 104S-C23D210BC

Resolutions For 104S-C23D210BC

About

Technical Specifications for 104S-C23D210BC

BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104S-C23D210BC
DescriptionReversing Contactor
Current23 Amps
Voltage110/120 Volts
Frequency50/60 Hertz
StandardsUL, CSA, IEC, CE, CCC
Temperature-25 to 60 degrees Celsius
Altitude 2000 Meters
MountingPanel or DIN Rail
BrandAllen-Bradley / Rockwell Automation
Series104 IEC Safety Contactors
Part Number104S-C23D210BC
DescriptionReversing Contactor
Current23 Amps
Voltage110/120 Volts
Frequency50/60 Hertz
StandardsUL, CSA, IEC, CE, CCC
Temperature-25 to 60 degrees Celsius
Altitude 2000 Meters
MountingPanel or DIN Rail

About 104S-C23D210BC

The 104S-C23D210BC contactor is a 104 IEC series safety reversing contactor made by Allen-Bradley. The contactor has a current rating of 23 Amps. This line side contactor has 1 NO and 5 NC auxiliary contact circuits. It has a voltage rating of 110/120 Volts. For different voltage levels, the contactor has a variable operating frequency of 50/60 Hertz. It has different power ratings with different voltage levels. This IEC certified contactor has 3 main contactors and it is equipped with both mechanical and electrical interlocks. It comes with reversing power wiring. The 104S-C23D210BC contactor is a 3-phase unit with a small form factor. It can easily be installed in small spaces and it saves expensive panel space. It can be mounted with a DIN rail or panel. The contactor is certified with the UL, CSA, IEC, CE, and CCC standards.



 



The contacts of the Allen-Bradley 104S-C23D210BC 104 IEC series contactor are located on both the top and bottom side of the contactor. During the installation, the main power should be fully disconnected and the contactor should be properly grounded. The contactor is equipped with a high-performance surge suppressor that protects the unit from transients or voltage spikes. It has mechanical interlocks and latches that are designed to be efficient. The 104S-C23D210BC contactor has 3 main poles and comes with 2 identical contactor units inside it. It has terminal lugs and shields made of high quality materials. The environmental temperature should always be set between - 25 and 60 degrees Celsius for use in an environment with no condensation. It can be used at an altitude of 2000 meters above sea level.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104S-C23D210BC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104S-C23D210BC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF