107T-BWZJ3-RC16S-D1D | Allen Bradley Motors 107T IEC Open Starters

107T-BWZJ3-RC16S-D1D

107T-BWZJ3-RC16S-D1D

Description:

Allen-Bradley manufactures the 107T-BWZJ3-RC16S-D1D Starter as an IEC reversing combination starter. It belongs to the Bulletin 107T product line and it has a conventional coil.

Rated 4.6 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 107T-BWZJ3-RC16S-D1D

Add more parts to quote

Description:

Allen-Bradley manufactures the 107T-BWZJ3-RC16S-D1D Starter as an IEC reversing combination starter. It belongs to the Bulletin 107T product line and it has a conventional coil.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 107T-BWZJ3-RC16S-D1D.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 5 reviews

    Technical Specifications for 107T-BWZJ3-RC16S-D1D

BrandAllen-Bradley / Rockwell Automation
Series107T IEC Open Starters
Part Number107T-BWZJ3-RC16S-D1D
Product TypeIEC Reversing Combination Starter
MountingPanel Mounting
Contactor Size100-C12
ListingThis specification list was created by Do-Supply-Inc.
AC Coil Voltage12 to 550V at 50 Hz, 12 to 600V at 60 Hz (Conventional)
Contact Configuration1 NO, 1 NC
Circuit Breaker/Fuse Current10 to 16 A
Overload Relay193-ED1
Overload Relay Current9 to 45 A
BrandAllen-Bradley / Rockwell Automation
Series107T IEC Open Starters
Part Number107T-BWZJ3-RC16S-D1D
Product TypeIEC Reversing Combination Starter
MountingPanel Mounting
Contactor Size100-C12
AC Coil Voltage12 to 550V at 50 Hz, 12 to 600V at 60 Hz (Conventional)
Contact Configuration1 NO, 1 NC
Circuit Breaker/Fuse Current10 to 16 A
Overload Relay193-ED1
Overload Relay Current9 to 45 A
s

About 107T-BWZJ3-RC16S-D1D

The 107T-BWZJ3-RC16S-D1D Starter is an IEC reversing 3-component combination starter with a conventional coil. It is a product of Allen-Bradley/Rockwell Automation and part of the Bulletin 107T product line. This unit comes with a contactor size of 100-C12 and it has a 141A panel mounting module that it is built on. The 107T-BWZJ3-RC16S-D1D Starter provides an AC conventional coil voltage range of 12 to 550 Volts at a frequency of 50 Hertz, and an AC conventional coil voltage of 12 to 600 Volts at 60 Hertz of frequency. The 107T-BWZJ3-RC16S-D1D Reversing Starter has one Normally Open (NO) and one Normally Closed (NC) auxiliary contact configuration. Other specifications of this starter include a 140M-D8N circuit breaker/fuse holder which is ideal for the Allen-Bradley Bulletin 103T and Bulletin 107T devices. The current range of the fuses or circuit breaker on the starter ranges from 10 to 16 Amps.



 



The Allen-Bradley 107T-BWZJ3-RC16S-D1D IEC Reversing Combination Starter from the 107T series has one Normally Open (NO) magnetic and thermal trip indication contact as well as one Normally Open (NO) auxiliary contact. It supports front mounting for the auxiliary and trip indication contact for the circuit breaker. However, this starter does not support side mounting for the auxiliary and trip indication contact for the circuit breaker. The Allen-Bradley 107T-BWZJ3-RC16S-D1D IEC Reversing Combination Starter features a 193-ED1 overload relay which is suitable for use with the 3-component combination starters in the Allen-Bradley Bulletin 103T and Bulletin 107T series. The overload relay current range of this starter is from 9 to 45 Amps for the 193-EC2 and 193-EC1 overload relays.



Repair Services for 107T-BWZJ3-RC16S-D1D

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 107T-BWZJ3-RC16S-D1D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 107T-BWZJ3-RC16S-D1D

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 107T-BWZJ3-RC16S-D1D

Resolutions For 107T-BWZJ3-RC16S-D1D

About

Technical Specifications for 107T-BWZJ3-RC16S-D1D

BrandAllen-Bradley / Rockwell Automation
Series107T IEC Open Starters
Part Number107T-BWZJ3-RC16S-D1D
Product TypeIEC Reversing Combination Starter
MountingPanel Mounting
Contactor Size100-C12
AC Coil Voltage12 to 550V at 50 Hz, 12 to 600V at 60 Hz (Conventional)
Contact Configuration1 NO, 1 NC
Circuit Breaker/Fuse Current10 to 16 A
Overload Relay193-ED1
Overload Relay Current9 to 45 A
BrandAllen-Bradley / Rockwell Automation
Series107T IEC Open Starters
Part Number107T-BWZJ3-RC16S-D1D
Product TypeIEC Reversing Combination Starter
MountingPanel Mounting
Contactor Size100-C12
AC Coil Voltage12 to 550V at 50 Hz, 12 to 600V at 60 Hz (Conventional)
Contact Configuration1 NO, 1 NC
Circuit Breaker/Fuse Current10 to 16 A
Overload Relay193-ED1
Overload Relay Current9 to 45 A

About 107T-BWZJ3-RC16S-D1D

The 107T-BWZJ3-RC16S-D1D Starter is an IEC reversing 3-component combination starter with a conventional coil. It is a product of Allen-Bradley/Rockwell Automation and part of the Bulletin 107T product line. This unit comes with a contactor size of 100-C12 and it has a 141A panel mounting module that it is built on. The 107T-BWZJ3-RC16S-D1D Starter provides an AC conventional coil voltage range of 12 to 550 Volts at a frequency of 50 Hertz, and an AC conventional coil voltage of 12 to 600 Volts at 60 Hertz of frequency. The 107T-BWZJ3-RC16S-D1D Reversing Starter has one Normally Open (NO) and one Normally Closed (NC) auxiliary contact configuration. Other specifications of this starter include a 140M-D8N circuit breaker/fuse holder which is ideal for the Allen-Bradley Bulletin 103T and Bulletin 107T devices. The current range of the fuses or circuit breaker on the starter ranges from 10 to 16 Amps.



 



The Allen-Bradley 107T-BWZJ3-RC16S-D1D IEC Reversing Combination Starter from the 107T series has one Normally Open (NO) magnetic and thermal trip indication contact as well as one Normally Open (NO) auxiliary contact. It supports front mounting for the auxiliary and trip indication contact for the circuit breaker. However, this starter does not support side mounting for the auxiliary and trip indication contact for the circuit breaker. The Allen-Bradley 107T-BWZJ3-RC16S-D1D IEC Reversing Combination Starter features a 193-ED1 overload relay which is suitable for use with the 3-component combination starters in the Allen-Bradley Bulletin 103T and Bulletin 107T series. The overload relay current range of this starter is from 9 to 45 Amps for the 193-EC2 and 193-EC1 overload relays.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 107T-BWZJ3-RC16S-D1D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 107T-BWZJ3-RC16S-D1D. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF