Free UPS Ground on All Parcel Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326-CCU-EL-060

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326-CCU-EL-060

|
Need a Specific Revision?

The 1326-CCU-EL-060 cable is a motor cable that is manufactured by Allen Bradley with its features designed to ensure compatibility with Ultra series drives and the Allen Bradley Kinetix devices. It has been certified with an IP 67 protection rating, and this means that it can be dropped into a body of water up to one meter deep and still resist any effects of water.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326-CCU-EL-060

ManufacturerAllen Bradley
Product typeDrive
Product Line1326 Motors
Part Number1326-CCU-EL-060
Weight10.00 lbs (4.54 kg)
DescriptionMotor Cable
Bend Radius3 inches
RatingIP67
Cable length60 meters
Connector height of the table4.3 inches
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326-CCU-EL-060 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326-CCU-EL-060 units instead of migration.

Request a Repair

The 1326-CCU-EL-060 cable is a waterproof cable with a length of 60 meters and it is easy to connect to a drive that is a long distance away. The IP 67 rated cable is suitable for use in applications where there are harsh conditions experienced during the operations.  The 1326-CCU-EL-060 standard cable has a bulkhead connector, which is 1 among the several kinds of accessories that it supports. For instance, the bulkhead connector of the 1326-CCU-EL-060 cable has a mounting hole that is 0.132 inches wide and that uses a 3/8 inches screw.  A Philips screwdriver or a drill and drill bits are the best tools to use while installing a bulkhead connection. The cable's bend radius is 0.41, with the opening diameter of the connector is 1.438 inches.

Protect the 1326-CCU-EL-060 cable from overheating by keeping it away from heat-emitting devices and leave enough clearance between multiple cables. Cable spacing can be achieved by using different separators between the cables. The clearance should be at least a 10% allowance clearance between the cables. This gives them an allowance to move as required during machine operation. Place the cable into a cable carrier during installation and do not weave it with other wires. Make sure to lay the cables flat for at least 24 hours before installation. For an effective installation, a cable connector that is 4.3 inches wide is preferred, with a bend radius of 3 inches. Ensure that the cables are not pulled tightly against the outer or inner track curves. Remember that a bulkhead connector can only be connected to a standard connector and that the cable length cannot exceed 90 meters.