Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326-CPB1-015

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326-CPB1-015

|
Need a Specific Revision?

The Allen-Bradley 1326-CPB1-015 cable is a single-standard power cable assembly that is used with the Bulletin 1326 series 460 Volts AC rated servo motors and the 1394 motion control system. It has a minimum bend radius of 76.2 millimeters, and a total cable length of 15 meters.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326-CPB1-015

ManufacturerAllen Bradley
CategoryMotors
Product Line1326 Motors
Part Number1326-CPB1-015
Weight9.00 lbs (4.08 kg)
DescriptionPower Cable
Voltage460 Volts AC
ApplicationSatandard
ShieldingBraided Shield Wire
Quantity1
Connection TypeLocal and Remote In-line Connection
Ingress RatingIP65
Cable Length15 Meters
Bend Radius76.2 millimeters
Number of Wires10
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326-CPB1-015 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326-CPB1-015 units instead of migration.

Request a Repair

The Allen-Bradley 1326-CPB1-015 torque plus servo motor power cable is a Series B power cable assembly for the Allen-Bradley 1326AB series brushless AC synchronous servo motors with 460 Volts AC voltage ratings. This UL-listed cable assembly is designed to provide a motor cabling solution to a wide range of high-performance motion control systems. The 1326-CPB1-015 cable features braided cable shielding that offers superior electromagnetic noise immunity and a push/pull connector point at the motor end for easy installation. The 1326-CPB1-015 cable is compatible with the 460 Volts AC rated 1326AB series servo motors with the 1326AB-B4xx and 1326AB-B5xx frames and from the Allen-Bradley 1391B-ES or 1391-DES drive family. It is also the ideal power cable solution for the 1394 motion control system.

The 1326-CPB1-015 cable has a maximum cable length of 15 meters (49.2 feet), and an approximate cable diameter of 14 millimeters (0.55 inches). The 1326-CPB1-015 cable is a single-standard power cable designed for standard 1394 applications, and it comes with an environmentally sealed IP 65 enclosure rating that offers protection in harsh environmental conditions. This power cable assembly can provide CE compliant in-line connection solutions, and it allows for quick connection or disconneciont both inside and outside the cabinet wall (for in-line and remote in-line connections). The 1326-CPB1-015 power cable consists of 9 individually-isolated wires (3 power, 2 brake wires, 2 thermostat wires, 1 GND wire, and 1 braided shield wire) with an average wire gauge size of 1.36-millimeters square (16 AWG) and 9 different pinpoints. The power wires connect to the U1, V1, and W1 terminals, and the brake wires connect to the TB1-3 and TB1-4 1394 terminals.