Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-A1G-11

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-A1G-11

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 1326AB-A1G-11 motor is a Bulletin 1326 industrial servo motor. It is an AC-powered high-performance type of servo motor. The 1326AB-A1G-11 servo motor’s frame diameter is 4.25 inches or 108 millimeters. It is protected by an IP 65 rated enclosure which is dust-tight and it uses environmentally sealed power and feedback cables. The 1326AB-A1G-11 servo motor operates at a maximum rated speed of 5000 RPM.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-A1G-11

ManufacturerAllen Bradley
Product TypeAC Servo Motor
Product Line1326 Motors
Part Number1326AB-A1G-11
Weight0.19 lbs (0.09 kg)
Max. Op. Speed5000 rpm
Frame Diameter108 mm
Rated Motor Speed5000 rpm
Flange and Shaft SeriesInch Combination Face/Flange with Keyway
Motor Rated TorqueN/A
Motor Rated Output0.9 kW
System Continuous Torque1.8 Nm
System Peak Stall Torque5.4 Nm
Standard OptionN/A
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-A1G-11 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-A1G-11 units instead of migration.

Request a Repair

The Allen-Bradley 1326AB-A1G-11 AC Servo Motor is a high performance, three-phase, synchronous motor from the 1326AB servo motor family. This AC servo motor can be used with 1391 AC servo controllers. Its maximum operation speed and rated motor speed are both 5000 rpm. It has 0.9 kilowatts of motor rated output, 1.8 N-m (16 pounds on an inch) of system continuous torque, and 5.4 Nm (48 pounds on an inch) of system peak stall torque with a 1391B servo amplifier. Its amperage rating at continuous torque is 4.5 Amps. The rotor inertia is 0.005 kg-m2_._ All ratings are for 40 degrees Celsius motor ambient temperature, and 110 and 60 degrees Celsius amplifier ambient temperature. The motor has two thermal switches to protect the motor from over-temperature conditions. The 1326AB-A1G-11 servo motor comes with a standards inch combination face/flange with a keyway. The weight of the motor is around 10 kilograms.

The IP 65 rated dust-tight 1326AB-A1G-11 servo motor comes with a UL recognized insulation system, and environmentally sealed feedback and power cables, MIL-spec connectors and totally enclosed, non-ventilated construction. This AC servo motor is designed for factory use only. It is widely used in industrial automation machinery for a range of motion control applications. The 1326AB-A1G-11 AC Servo Motor is a durable motor to use in harsh environments. These motors can be used with a variable frequency drive for motion control systems that require a precise and controlled mechanical positioning. And the motor has an advanced design in order to achieve better torque and high-precision moves with well-regulated speed. During installation, allowing adequate clearance around the motor will keep it within the specified operating temperature range.