Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-A2E-11-2287B

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-A2E-11-2287B

|
Need a Specific Revision?

The 1326AB-A2E-11-2287B servo motor is a high-performance AC servo motor that comes with a standard inch combination face/flange with a keyway. It has 1.1 kilowatts motor rated output, 3.6 N-m (32 pounds on an inch) of system continuous torque, 10.84 N-m (96 pounds on an inch) of system peak stall torque, 3000 rpm of maximum operation speed, and 5.2 Amps of amperage rating at continuous torque.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-A2E-11-2287B

ManufacturerAllen Bradley
Product TypeAC Servo Motor
Product Line1326 Motors
Part Number1326AB-A2E-11-2287B
Weight24.00 lbs (10.89 kg)
Max. Op. Speed3000 rpm
Frame Diameter108 mm
Rated Motor Speed3000 rpm
Flange and Shaft SeriesInch Combination Face/Flange with Keyway
Motor Rated TorqueN/A
Motor Rated Output1.1 kW
System Continuous Torque3.6 Nm
System Peak Stall Torque10.84 Nm
Standard OptionN/A
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-A2E-11-2287B has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-A2E-11-2287B units instead of migration.

Request a Repair

The Allen-Bradley 1326AB-A2E-11-2287B servo motor is an AC servo motor from 1326 servo motor series. This motor has a rated speed of 3000 rpm and a motor rated output of 1.1 kilowatts. It operates on a current of 5.2 Amps and all the ratings are for 40 degrees Celsius ambient. temperature The 1326AB-A2E-11-2287B servo motor can be used with the 1394 series of servo motor systems. It has 3.6 N-m (32 pounds on an inch_) of_ system continuous torque and 10.84 N-m (96 pounds on an inch) of system peak stall torque and 0.0008 kg-m2 of rotor inertia with a 1391B servo amplifier. The motor contains two thermal switches wired in series that will open on an over-temperature condition. They are set to open at 150 degrees Celsius (typical) and close at 90 to 100 degrees Celsius (typical). Its frame diameter is 108 millimeters. It comes with the standard inch combination face/flange with a keyway.

The 1326AB-A2E-11-2287B AC servo motor’s brushless resolver supplies position, commutation, and velocity feedback information. It has a precision balance of 0.0005 inches (0.0127 millimeters) of total peak-peak displacement. The motor has a UL-recognized insulation system. It can be mounted vertically with the shaft in the up or down direction. The 1326AB-A2E-11-2287B servo motor is IP 65 rated and it is suitable to function in harsh and extreme environments. But when it is not used with a shaft seal option (when externally mounted encoder/resolver feedback or blower packages are used), the motor loses its IP 65 rating. It comes with environmentally sealed power and feedback cable packages. This also provides durability in harsh environments by not having onboard electronics in the motor. It has ferrite magnets for cost-effective performance. This high-performance servo motor is designed to meet the stringent requirements of servo system applications.