Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-A2E-11-A4

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-A2E-11-A4

|
Need a Specific Revision?

The 1326AB-A2E-11-A4 servo motor is a high-performance AC servo motor that comes with a standard inch combination face/flange with a keyway. It has 1.1 kilowatts of motor rated output, 3.6 N-m of system continuous torque, 10.84 N-m of system peak stall torque, 3000 rpm of maximum operation speed, and 5.2 Amps of amperage rating at a continuous torque. It includes an 8.1 N-m holding brake with a 90 Volts DC Coil.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-A2E-11-A4

ManufacturerAllen Bradley
Product TypeAC Servo Motor
Product Line1326 Motors
Part Number1326AB-A2E-11-A4
Weight36.19 lbs (16.41 kg)
Max. Op. Speed3000 rpm
Frame Diameter108 mm
Rated Motor Speed3000 rpm
Flange and Shaft SeriesInch Combination Face/Flange with Keyway
Motor Rated TorqueN/A
Motor Rated Output1.1 kW
System Continuous Torque3.6 Nm
System Peak Stall Torque10.84 Nm
Standard Option72 lb.-in. (8.1 N-m) Holding Brake w/90V DC Coil
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-A2E-11-A4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-A2E-11-A4 units instead of migration.

Request a Repair

The 1326AB-A2E-11-A4 servo motor is a high-performance AC servo motor that belongs to the 1326AB family of servo motors. It is a three-phase, brushless AC synchronous motor that comes with the standard inch combination face/flange with a keyway. These servo motors are compatible with the Allen-Bradley 1391 AC servo controllers. Its maximum operation speed and rated motor speed is 3000 rpm. The rated continuous torque (at 40 degrees Celsius) is 3.6 N-m. The rated maximum stall torque is 10.84 N-m. The 1326AB-A2E-11-A4 servo motor has a 108-millimeter frame diameter and a stack length of 2 millimeters. It includes an 8.1 N-m holding brake with a 90 Volts DC Coil. The motor has 12.7 kilograms of weight. It can produce a rated output power of 1.1 kilowatts.

The 1326AB-A2E-11-A4 servo motor has a rotor (permanent magnet) for increased servo response, a three-phase sinusoidal wound stator field for direct transfer of heat, and smooth operation at low speeds. This servo motor is panel mounted and it can be mounted horizontally or vertically at any angle. It contains two thermal switches wired in series that will open on an over-temperature condition. This thermal overload relay is actuated when the motor temperature exceeds 150 degrees Celsius. This motor has an integral sprint-set that is a holding brake with a 90 Volts DC coil. The features that are available as options with the 1326AB-A2E-11-A4 servo motor includes shaft oil seal kits, a junction box kit, resolver feedback packages, cables for power and feedback, a brake power supply, and a blower cooling kit. This motor has a 100% continuous rated output at a stall, and a precision balance of 0.0005 inches (0.0127 millimeters) total peak-peak displacement to ensure that it is suitable for a variety of factory-based motion control applications.