Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-A530E-21

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-A530E-21

|
Need a Specific Revision?

The 1326AB-A530E-21 servo motor is a servo motor by Allen-Bradley. It is part of the 1326AB Torque Plus servo motor series. It uses a voltage rating of 380 to 460 Volts AC and it has a motor rated speed of 3000 to 4000 RPM maximum

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-A530E-21

ManufacturerAllen Bradley
CategoryTorque Plus Servo Motors
Product Line1326 Motors
Part Number1326AB-A530E-21
Weight74.00 lbs (33.57 kg)
Voltage380 - 460V AC
Frame Diameter149 Millimeters
Magnet Stack Length30
Continuous Torque Current28.4 Amperes
Rated Power5.5 Kilowatts
Rated Speed3000/4000 RPM
MountingIEC Metric Flange Mounting with Keyway Option
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-A530E-21 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-A530E-21 units instead of migration.

Request a Repair

Manufactured by Allen-Bradley/Rockwell Automation, the 1326AB-A530E-21 servo motor is part of the 1326AB Torque Plus servo motor series. This device has an operating voltage range of 380 to 460 Volts AC, with a frame diameter of 149 millimeters or a 165 millimeters bolt center. It has a magnet stack length of 30 as well as a motor rated speed of 3000 to 4000 RPM. This servo motor also features a NEMA, IEC metric flange mounting with the keyway option. The 1326AB Torque Plus servo motors come with a standard motor operating speed, and when the device is used with the 1391-DES drive, the motor rated speed increases to higher speed levels. Other specifications of the 1326AB-A530E-21 servo motor include a continuous stall torque of 18.4 N-m or 163 pounds on an inch, a peak stall torque of 55.2 N-m or 487 pounds on an inch, a continuous torque current of 28.4 Amps, and a rated output of 5.5 kilowatts.

The Allen-Bradley 1326AB-A530E-21 servo motor has an ambient temperature rating of 40 degrees Celsius and an ambient amplifier temperature of 60 degrees Celsius. It is recommended for the usesr to contact the manufacturer Allen-Bradley for information about using the servo motor in extreme environments. These motors come with 2 thermal switches that are wired in series to help open an overtemperature environment. Typically, they open at 155 degrees Celsius and close at 90 to 100 degrees Celsius. The 1326AB-A530E-21 servo motor has a thermal time constant of 66 minutes, a winding voltage constant of 49.9 Volts per 1000 RPM and winding terminal resistance of 0.182 ohms. The mechanical motor weight of this device is 34.5 kilograms or 76 pounds.