1326AB-A740B-21-K7

The 1326AB-A740B-21-K7 is a Ferrite AC servo motor from the Allen-Bradley’s Torque Plus series. This servo motor runs on 230 Volts of AC voltage; it can achieve relatively modest Revolution Per Minute rates at 1600 RPM, and this servo motor has a specially designed housing which provides reduced length and increased torque for the device. The stall torque of this motor is around 56.5 N-m (500 pounds on an inch) and it gives 8.3 kW at its output. An IEC Metric Flange is used to mount this device, which has keyway on its shaft. The Allen-Bradley 1326AB-A740B-21-K7 has a 194 millimeter (5.88 inch) frame diameter. The special feature of this Torque Plus series AC drive is 45.2 N-m (400 pounds on an inch) while the spring-set holding brake has a 24 Volt DC actuated coil. A brushless resolver is integrated into the housing, that ensuring durability in harsh environments. This module is guaranteed to safely endure shocks and high ambient temperatures and the resolver supplies position feedback information; the resolution is also adjustable from 512 to 2048 ppr.

Allen-Bradley’s 1391-DES AC Servo Drive is used to control this type of servo motor. This 1391 series control modules should be used with the 1326AB-A740B-21-K7 servomotor for control purposes and to enable this servomotor to reach its optimal performance; one of the advantages for this AC servo motor is that it can be mounted either horizontally or vertically, or generally by any angle. The 1326AB-A740B-21-K7 should be kept in a robust IP65 rated enclosure. There are two thermal switches connected in the series (1A relay contact) for thermal overload signaling and this thermal overload relay is activated when the motor temperature exceeds 155 degrees Celsius (311 degrees Fahrenheit) ±10%. The approximate weight of this device is 14.515 kilograms. The dimensions of the device are 207.5 millimeters (8.17 inches) x 207.5 millimeters (8.17 inches) x 498.2 millimeters (19.61 inches).