1326AB-B2E1100151

The 1326AB-B2E1100151 is an Allen-Bradley servo motor. It contains a 3000 RPM maximum optimum speed. It also has a frame diameter of 149mm. Its rated motor speed is 3000 RPM. This servo also has a system continuous torque of 10.53 Nm and a motor rated output of 2.28 kW. Its peak stall torque is 21 Nm. In addition to this, it belongs to the flange and shaft series that has an inch combination face. This servo motor is made with a unique enclosure that aids in reducing motor length while increasing the continuous torque rating. The 1326AB-B2E1100151 has high-performing brushless, AC, three-phase, synchronization which helps to meet the high-performance motion system’s stringent requirements.

The 1326AB-B2E1100151 is wired to be used with the motion control systems. This servo motor also does have special flux profile permanent magnets that are manufactured by Allen-Bradley which increases this servo’s response. The three0phase, sinusoidal wound stator field is also useful for the smooth operation of this device when it is at a low speed. This device has a TENV construction of IP65 standard that can be installed alongside an optional shaft seal. It is also made with an extruded aluminum casing that increases and improves its rate of heat transfer.

The 1326AB-B2E1100151 also has a continuous rated output torque of 100% when it is stalled. Its insulation system is of the UL-listed type. It also can be mounted vertically at any angle with the shaft pointing either up or down. In the 1326AB-B2E1100151 is a closed thermal switch which is in the motor’s winding that gives a thermal overload indication. This device also does have a threaded hole on the shaft’s surface that aids in securing couplings. Coupled with this, it also has a CEI/IEC 72-1 metric flange mount that contains metric shafts. This motor can come with either a standard resolver or a high – resolution encoder feedback device.