1326AB-B3C-11

The 1326AB-B3C-11 is a high-performance AC servo motor and it belongs to the 1326 AB servo motors series. It is manufactured by Allen-Bradley. It has a 2000 RPM maximum operating speed and a 149 millimeters frame diameter. It also has a 17.3 N-m system continuous torque and has a 2.5 Kilowatts motor rated output. It is IP65-rated when it is used with the shaft seal option which makes it dustproof and it can protect itself from the low-pressure water. It has a TENV construction. It has a permanent magnet rotor to increase the servo’s response. It has an aluminum housing for outstanding heat transfer. The 1326AB-B3C-11 is manufactured for factory use only. It has a three-phase sinusoidal wound stator field to directly transfer heat for smooth and consistent operation at lower speeds. Ferrite magnets are used for cost-effective performance.

The 1326AB-B3C-11 comes with a brushless resolver which provides feedback information on position, commutation, and velocity. It also helps in providing durability in harsh environments, high operating temperatures, and high vibration by not having an onboard electronic device. For secure couplings, threaded holes are present on the face of the shaft. At almost 0 RPM, it has a 100% continuous rated output torque and a precision balance of 0.0005 inches with a total peak displacement. The 1326AB-B3C-11 has an environmentally protective cable package for the power and feedback cables. It has an inch combination flange with a keyway for mounting and shafting. This motor has been specially manufactured in a compact size to reduce the motor length and to enhance continuous torque ratings.