1326AB-B410G-21-TJB

The 1326AB-B410G-21-TJB is a ServoMotor manufactured by Allen-Bradley. It has a 460/380 Volts AC voltage and a 500 RPM rated motor speed. It has a frame diameter of 108 millimeters and features a 2.7 N-m system continuous torque. It also comes with a 1.0 kW motor rated output and 8.1 N-m system peak stall torque. The 1326AB-B410G-21-TJB comes with a modified housing that reduces the length of the motor and helps to increase the torque ratings. It is a high-performance and top-quality motor that helps meet the requirements of high-performance motor systems. The 1326AB-B410G-21-TJB ServoMotor features special flux profile magnets, which help to increase the servo response. It also features a three-phase sinusoidal-wound stator field, which gives it the ability to work at slow speeds. It features an extended aluminum housing which helps to improve the heat transfer and a UL-listed insulation system which makes its installation easy at any angle with the shaft placed up or down.

The 1326AB-B410G-21-TJB is a brushless and synchronous ServoMotor and it features a closed thermal switch with ratings of 115 Volts AC, which helps to indicate instances of overloading within the system. It also features a TENV construction, IP65 standard enclosure, and a precision balance of 0.0127 millimeters total peak-to-peak displacement. When connecting the ServoMotors, it is important to be careful not to bend the cable connecting the motor and the drive. It is important to install the Viton shaft oil seal and the seal, which helps to reduce oil splashes or water.  For any rotating device fixed to the system, it is important to align the devices well. All motor bolts should be well tightened.