1326AB-B410J-21-L

The Allen-Bradley 1326AB-B410J-21-L servo motor is a high-performance servo motor. The 1326AB-B410J-21-L servo motor can be used as a drop-in replacement for the older 1326AB series servo motors from Allen-Bradley. The 1326AB-B410J-21-L servo motor, like other motors in the 1326AB series, contains equipment rotors, connectivity, feedback, and stators that allow it to replace older 1326AB series servo motors without making changes to the tuning parameters, adapters/couplers, cables, or the motor data files. The 1326AB-B410J-21-L servo motor has a continuous stall torque of 24 pounds on an inch, a peak stall torque of 72 pounds on an inch, and a Horsepower rating of 1.9 Horsepower while its apparent power rating stands at 1.4 kilowatts. The motor’s rotor moment of inertia stands at 0.000433 Kg-m (squared).

The 1326AB-B410J-21-L servo motor has a maximum operating speed of 7250 revolutions per minute. The servo motor’s thermostat ratings include a contact resistance rating not exceeding 0.10 Ohms and a Mylar Nomex insulation dielectric device that is capable of withstanding a voltage rating of up to 1500 Volts AC at a frequency of 50 to 60 Hertz for 1 minute. Note that the thermostat can accommodate an operating temperature of up to 140 degrees Celsius, plus or minus 5 degrees Celsius. The thermostat features contacts that are normally closed. The 1326AB-B410J-21-L servo motor has an IEC metric flange with a keyway and it operates with an input voltage of 460 Volts AC. The motor has a 108-millimeter frame diameter that has a 115-millimeter bolt center. The 1326AB-B410J-21-L servo motor has an environmental protection rating of IP 67.