1326AB-B410J-21-TJB

The Allen-Bradley 1326AB-B410J-21-TJB is an AC Servo Motor of the ferrite-type which has a 460V AC voltage rating and a 7250 RPM at 460V AC rated speed. Its system continuous torque, system peak stall torque, system continuous stall current, and system peak stall current vary and are dependent on the axis module that is connected. The system torques and currents of the 1326AB-B410J-21-TJB motor are 2.3 N•m for the system continuous torque, 4.7 N•m system peak stall torque, 3 A system continuous stall current, and 6 A system peak stall current when used with the 1394-AM03 axis module, 2.7 N•m for the system continuous torque, 7 N•m system peak stall torque, 3.48 A system continuous stall current, and 9 A system peak stall current for the 1394-AM04 axis module, and 2.7 N•m for the system continuous torque, 8.1 N•m system peak stall torque, 3.48 A system continuous stall current, and 140. A system peak stall when used with the 1394-AM07 axis module. It has a motor rated torque of 2.7 Nm and a motor rated output of 1.4 kW that remain constant regardless of torque.

This brushless motor also has a 108 mm frame diameter, 115 mm bolt center, and 1-inch motor stack length. An IEC metric flange with a keyway for its shaft and for mounting is present on the 1326AB-B410J-21-TJB motor and when it is mounted, make sure that it is leveled vertically and at any angle with its shaft angled up or angled down. The 1326AB-B410J-21-TJB is ideally used with the Allen-Bradley 1391 Digital AC Servo Drives.