1326AB-B420E-21-ML

The 1326AB-B420E-21-ML servo motor is an ML-series servo motor. Allen-Bradley is the sole manufacturer of this device. The device runs at a maximum speed of 3000 rpm when it is applied with an input voltage of 460 Volts AC and it runs at 2500 rpm when it is applied with 380 Volts AC, respectively. This Allen-Bradley servo motor is widely used in different industrial processes. It has all of the basic features which are needed for the regulation of machine velocity, position, and acceleration. The 1326AB-B420E-21-ML servo motor has a 108-millimeter frame and it is made up of pure stainless steel. The magnet used inside the motor is manufactured from rare earth metal. The servo motor gives outstanding performance and results and it is a cost-effective industrial solution. This ferrite AC servo motor has a bolt center with a 115-millimeter diameter. It uses a total of 20 magnetic stacks. The servo motor uses serial communication ports for communicating with other Allen-Bradley equipment and other manufacturing processes.

The 1326AB-B420E-21-ML servo motor uses a flange and shaft type of keyway. The servo motor also has an IP 67 rating which makes it ready to operate in any harsh environmental condition. The IP 67 rating indicates the waterproof rating of the servo motor. A multi-turn high-resolution feedback encoder is available in the servo motor to transmit a series of running information to the operator. The encoder resolution is the number of measuring segments that are used in one revolution of an encoder shaft in a linear scale. The 1326AB-B420E-21-ML servo motor has a precise balance of 0.0005 inches for total peak displacement. The servo motor has been certified by the UL standard and other standards. The servo motor has a mechanical time constant and an electrical time constant. The motor runs at a maximum ambient temperature of 40 degrees Celsius. The compensation of the rotor weight is distributed to reduce the vibrational resonance in the servo motor.