1326AB-B420E-21-X92

The Allen-Bradley 1326AB-B420E-21-X92 is a Servo Motor that runs on a voltage of 380-460V AC and features a frame diameter of 108 mm. It also has rated motor speed of 3000 rpm. It has also been incorporated into an IEC Metric Flange with a keyway. This servo motor has a motor rated torque of 5 Nm and a motor rated output of 1.1 kW. It also has a system continuous torque of 5 Nm and a system peak stall torque of 14.9 Nm. The standard option in this servo motor is however not applicable. This servo motor requires the users to follow an installation process for it to work effectively. The installation process in the manual is one which the users can easily follow.

Before the installation of the 1326AB-B420E-21-X92 servo motor, the wiring system has to be checked. If therefore this motor has been wired into a system before connection, the user has to remove all the power before installing the adapter. This is to be done so that unnecessary disasters such as electric shock can be avoided. The user should also ensure that the back plate is removed from the end of the 1326AB-B420E-21-X92 motor. The shaft of this servo motor also needs cleaning so that oil and any other substance which might cause destruction can be eliminated.

The 1326AB-B420E-21-X92 servo motor features a supplied flexible coupling which comes with an insulating sleeve installed on one end. This feature has an important function because it is capable of helping the servo motor stay protected against heat originating from the encoder. The user needs to attach the adapter to the 1326AB-B420E-21-X92 motor by using the included screws. The screw requires tightening with the use of a torque that ranges between 2.3 and 2.8 N-m. The user is therefore required to insert the encoder shaft into the coupling and check it for proper installation.