Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B420H-S2K4L

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B420H-S2K4L

|
Need a Specific Revision?

The Allen-Bradley 1326AB-B420H-S2K4L servo motor is a servo motor device with an operating speed of 6000 RPM. An optional shaft seal adds an IP 67 protection rating to the motor.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B420H-S2K4L

ManufacturerAllen Bradley
CategoryMotors
Product Line1326 Motors
Part Number1326AB-B420H-S2K4L
Weight28.00 lbs (12.70 kg)
DescriptionServo Motor
Bolt Center149 millimeters
Magnetic Stacks4
Voltage460 Volts AC
Torque5.1 Nm
Brake24 Volts DC coil
Braking torque8.1 Nm
Frequency50/60 Hertz
Rotor moment of inertia0.0008
RMS Voltage1500 Volts
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B420H-S2K4L has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B420H-S2K4L units instead of migration.

Request a Repair

The 1326AB-B420H-S2K4L servo motor is a stainless-steel servo motor. It is a solid-state device designed and manufactured by Allen-Bradley. It is an AC servo motor meant for factory use only. It is small in size with a frame diameter of 149 millimeters. It comes with 4 magnetic stacks. The magnetic stacks help increase the adhesive force of the magnet and offer maximum performance. The servo motor takes in 460 Volts AC voltage as input and it has an operating speed of 6000 RPM for a normal load. It has a rated torque of 5.1 N-m. The 1326AB-B420H-S2K4L servo motor can add a shaft seal to increase the water-resistant ability of the servo motor. The shaft seal adds an IP 67 water-resistant protection rating to the servo motor. An 8.1 N-m holding brake with a 24 Volts DC coil is present in this servo motor as a braking device.

The 1326AB-B420H-S2K4L servo motor comes with an insulation dielectric made up of Mylar Nomex which can withstand 1500 Volts AC RMS with a frequency of 50/60 Hertz for a time period of 60 seconds. The servo motor has a rated peak torque of 44 N-m. The rotor moment of inertia of this servo motor variant is 0.0008. The operating temperature of the 1326AB-B420H-S2K4L lies between 0 and 40 degrees Celsius and it can be stored between -30 and 50 degrees Celsius when not in use. The installation environment should be properly ventilated and the relative humidity should be maintained at a level between 5 and 95%, non-condensing. The servo motor is fully compatible with the 1394 Allen-Bradley motion control system.