Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B430E-21-L

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B430E-21-L

|
Need a Specific Revision?

The 1326AB-B430E-21-L motor is an AC-powered permanent magnet servo motor. It has been manufactured by Allen-Bradley as part of the Bulletin 1326 product line. The 1326AB-B430E-21-L servo motor uses its permanent ferrite magnets to achieve the lowest possible levels of operation friction, and its ferrite magnets are installed in a 3-inch stack inside the motor. Its AC voltage rating is 460/380 Volts AC. The 1326AB-B430E-21-L servo motor has resolver-based feedback and an IP 67 environmental protection rating.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B430E-21-L

ManufacturerAllen Bradley
Product TypeServo Motor
Product Line1326 Motors
Part Number1326AB-B430E-21-L
UPC662453287447
Weight31.00 lbs (14.06 kg)
Voltage460/380V AC
Frame Diameter108 mm
Rated Motor Speed3000 rpm
Flange and Shaft SeriesIEC Metric Flange with Keyway
Motor Rated Torque6.6 Nm
Motor Rated Output1.4 kW
System Continuous Torque6.6 Nm
System Peak Stall Torque19.7 Nm
Standard OptionIP67 Environmental Rating
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B430E-21-L has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B430E-21-L units instead of migration.

View as PDF
Request a Repair

The Allen-Bradley 1326AB-B430E-21-L is a ferrite AC Servo Motor whose frame diameter measures 108 mm and its bolt center is 115 mm, and it comes with a 30 magnet stack length. Its voltage rating is 460V AC, while its rated speed is 3000 rpm, which increases to 4000 rpm when it is used with the 1391-DES drive. Its IEC metric flange with a keyway shaft makes the 1326AB-B430E-21-L motor mountable and it also has an environmental rating of IP67. Note that when mounting this brushless motor, it should be placed vertically at any angle and with the shaft located up or down.

The 1326AB-B430E-21-L motor also has a rated torque of 6.6 N•m or 58 lb•in and motor rated output of 1.4 kW when used with a 1394-AM03, 1394-AM04, or 1394-AM07 axis module. When connected to a 1394-AM03 axis module, its system continuous torque is 5.1 N•m, system peak stall torque is 10.1 N•m, system continuous stall current is 3 A, and system peak stall current is 6 A. If used with the 1394-AM04 axis module, the system peak stall torque becomes 15.2 N•m, and the system peak stall current becomes 9 A, while it is 19.7 N•m for the system peak stall torque and 11.6 A for the system peak stall current when the 1326AB-B430E-21-L motor is used with the 1394-AM07 axis module. Connecting this motor with the 1394-AM04 and 1394-AM07 axis module results in the same system continuous torque of 6.6 N•m and system continuous stall current of 3.9 A.

Revision Part #Also known as
1326AB-B430E-21-L Ser A1326AB-B430E-21-L/A, Series A, Rev A
Don't see your particular revision? Contact us now.